What is the bolt pattern for a Volkswagen Golf?
5×112 mm
Advertisement
| Bolt Pattern | 5×112 mm |
|---|---|
| Nut or Bolt | bolt |
| Nut Bolt Thread Type | M14x1.5 |
| Nut Bolt Hex | 17 |
| Bolt Length | 28 |
What PCD is a VW Golf?
Volkswagen – Golf 6 (2008 – 2012)
| PCD: | 5×112 |
|---|---|
| Center bore: | 57.1 |
| Offset: | 47 |
| Mounting: | Bolt – 14 x 1,50 |
| Wheel torque steel: | 120 Nm / 89 ft-lb |
What size wheels does a VW Golf have?
The 2020 Volkswagen Golf has tire sizes of P205/55HR16 and P225/40HR18. The 2020 Volkswagen Golf has wheel (rim) sizes of 16 X 6.5 and 18 X 7.5 inches.
What size are the Volkswagen Golf Trendline’s wheels?
This Volkswagen Golf FWD is running OEM Wheels 19×8. 5 +42 offset wheels, 225/35R19 Toyo Tires Proxes 4 Plus tires with a Louzao Suspension Coilovers Suspension, & needs No Modification & has No rubbing or scrubbing.
What is the bolt pattern on a 2012 VW Golf?
The 2012 Volkswagen Golf TDI 4-Door bolt pattern is 5-112 mm. This means there are 5 lugs and the diameter of the circle that the lugs make up measures 112 mm or 4.4 inches across.
What is a 5×112 bolt pattern?
The 5×112 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (112), the notional circle determined by the center position of the studs. The 5×112 bolt pattern is common to Aiways, Alfa Romeo, Audi, BMW, BMW Alpina, Bentley and Borgward vehicles.
Can I put 5×100 on 5×112?
There is not. If the offset is smaller allowing you to use spacers then you could buy spacer set that have hub mounting pattern 5×100 and rim pattern 5×112. Does not work with original offset as spacer will push the rim out too much.