Do I need roof tile clips?
For all roof areas and rafter pitches, every tile should be mechanically fixed with at least a nail, a clip, or a combination of these options that provide adequate combined resistance to the wind uplift loads on the tiles.
What is a verge clip?
Verges are one of the most exposed areas on a roof and therefore verge tiles are more at risk. FOS verge clips secure the verge tile directly at the edge, top and bottom to prevent the tile from uplift and turning.
Are roof tiles nailed to battens?
It is not necessary to nail every single tile to the battens. Every tile of the two rows at the eaves, those up the verges, and along the two rows of the ridge should be nailed, but beyond that it is only necessary to nail every fifth tile horizontally and every third tile as you move up the roof.
What are roof tile clips for?
Protect interlocking roof tiles from the elements with Roofing Superstore’s superb range of roof tile clips, also known as roof tile verge clips. These roof clips are fundamental in fixing an interlocking roof tile roof securely and for a long life span.
What are Valley clips?
A stainless steel clip, can be used for clipping together smaller cuts of interlocking tiles when using the Dry Fix Valley Troughs and all Dry Fix systems.
What do roof tile clips do?
Can roof tiles be screwed?
A less costly option, screws or nails are commonly used to fasten concrete roof tiles to the roof decking. The decision of which should be used for your specific project will be made by your roofing contractor as this is also dependent upon the wind exposure.
Should roof tiles be nailed down?
Roof tiles need to be nailed down to keep them in place. Without nails, some tiles may slip and fall off the roof, especially during harsh winds.
What type of fasteners are recommended for tile roofs?
Fasteners should be stainless steel, copper, aluminum or hot-dipped galvanized steel, but not electroplated. Anytime you walk a clay tile roof, you risk breaking tiles. The resistance to breakage varies with the tile’s quality, profile and condition.
What do eaves guards do?
Eaves Protection Boards prevent felt sagging at eaves level and subsequent ponding of water. They are suitable for use in new build or refurbishment situations and eliminate the need to strip a large section of the roof to replace old felt.