What is the flow rate of a 1.1 KW pool pump?
Flow rate: Max 50L/min (3m3/h) Head: Max 70M. Power: 1.1kW.
What is the flow rate of a 1hp pool pump?
52 GPM
From this chart, you can see that a 1 horsepower pump (the green curve) will give you 52 GPM flow on a system with 64 feet of head.
How many GPH is a 1.5 HP pool pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
Are Speck Pumps good?
Speck Pumps is known for offering its superior design quality, product quality, and outstanding service and spares network to our industry on a national basis as well as the rest of the African continent and the Indian Ocean Islands.
What gph pump do I need for pool?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
What size pool pump do I need for a 30 000 gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
How many GPH is a 1 hp pump?
You can see from the chart that a 1 horsepower pump will give you 52 gallons per minute on a system with 64 feet of head. We want to give you the flow information on each pump so that you can come up with the right pump the first time.
How many liters per minute of water does a 1 hp pump pump?
1 HP Single Phase Submersible Pump, Maximum Discharge Flow (LPM): 100 – 500 LPM.
How many gallons per minute does a 2 HP pool pump?
The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.
How do I calculate pool pump flow rate?
Divide the total gallons of water in the pool by the turnover rate in hours. Ideal turnover rate is between six and eight hours. To run the pump less time each day, lower the turnover rate. This will give you the gallons per hour or GPH.
Where are speck pool pumps made?
Australia
The Speck BADU brand is synonymous with German engineering excellence around the globe. All Speck pool and spa pumps are manufactured in Australia to Speck specifications to meet Australian standards.
What size pool pump do I need South Africa?
Use a 0.6kW pump with 2 Bag Sandfilter to filtrate upto 30000L water. Use a 0.75kW pump with 3 Bag Sandfilter to filtrate upto 60000L water. Use a 1.1kW pump with 4 Bag Sandfilter to filtrate upto 90000L water. Use a 1.5kW pump with 5 Bag Sandfilter to filtrate upto 12000L water.
What is the flow rate of 1.5 HP pump?
B-POWER Submersible Pump 1.5HP Total Head-62M Submersible Water Pump (1.5 HP)
| Brand | B-POWER |
|---|---|
| Flow Rate | 3000 LPM |
| Total Head | 62 m |
| Outlet Size | 32 mm |
| Pressure | 6.2 bar |
How many HP is 40 gpm?
Example – Horsepower Required to Pump Water
| Power Required to Pump Water (hp) | ||
|---|---|---|
| Volume Flow (gpm) | Height (ft) | |
| 30 | 0.0379 | 0.189 |
| 35 | 0.0442 | 0.221 |
| 40 | 0.0505 | 0.253 |
How many liters per minute does a 0.75 HP pump pumps?
30 Litres/minute – 0.75 hp.
What is the flow rate of a 3/4 HP pool pump?
4,750 Gallons Per Hour Maximum Flow Rate.
What is a good flow rate for a pool?
A turnover rate of 8 or 10 hours is a typical sizing rate for residential pools. All filters have flow requirements. D.E. filters are normally rated at 2 GPM per square feet (sq. ft.)
What should the flow rate be on a pool?
Calculate the flow rate needed to achieve proper filtration. One turnover only filters 37% of the water. After a second turnover, 86% of the water has been filtered. It takes four turnovers to filter 98% of the pool water….R-300.
| GPM | LPM |
|---|---|
| 10 – 150 | 37.8 – 567 |
| PSI | Bar |
| 75 | 5.2 |
| Pipe Sizes |