What string gauge should I use for C standard?
Guitar Strings
| Tuning | Fender Scale (25.5″) | Gibson Scale (24 3/4″) |
|---|---|---|
| C Standard | 12-56 (regular tension) | 12-56 (normal tension) |
| 11-54 (loose feel) | ||
| Drop C | 11-54 +56 (normal tension) | 12-56 (normal tension) |
| Drop B | 11, 15, 20, 36, 48, 60 | 12, 16, 24, 36, 48, 60 |
Can you tune A baritone guitar to C standard?
You technically can tune a baritone guitar to standard tuning. But this comes with a few challenges. A longer scale length increases string tension. And if you tune it up, you’ll have really tight strings.
What string gauge does Lee Malia use?
.080-gauge
I use a really thick set of strings [a custom . 080-gauge set from Ernie Ball], so the Les Paul’s higher frets help with that. I was playing normal strings for ages. We tune low, to C standard or drop-As, so I started using a .
What are the best strings for drop C tuning?
#3 Ernie Ball “Not Even Slinky” 12-56 This set is one of the best picks when it comes to strings for Drop C because it will work great for just about every scale length. So it doesn’t matter if you play a guitar with a shorter Gibson-style scale, or the more modern 25.5 scale.
How do you tune a guitar to C standard?
Lesson: How to Tune Your Guitar to Open C In open C tuning, your low E string will be taken down two whole steps to C, A will tune a whole step down to G, D will go one whole step down to C, G will stay the same, B is tuned up one half step to C, and the high E stays the same. — C (tuned up a half step from B)
Can you put baritone strings on a regular acoustic guitar?
Baritone strings are like . 13’s. So, I wouldn’t advise you to put them on your guitar if you’re playing anything lower than standard C. Even standard C may have too much tension on the strings.
What string gauge is best for drop B?
If you want to tune down to Drop B Tuning, you might want to switch to a heavier set of strings. There is no best string gauge to use in Drop B Tuning as every guitarist has different preferences. You will likely want to use at least 10-gauge strings to prevent the strings from becoming too slack.
What gauge is B tuning?
56 is the standard gauge for a 7th string on a guitar which is a B, but it’s not really all that tight. Will be slighter looser again assuming your LP is a 24.75″ scale. If you want B and you want to drop to A as well I would suggest at least a mid 60 (64/66 or so) – give take depending on how much tension you like.
Do you need thicker strings for drop C?
Your strings for Drop C are going to be much different than the ones that you use for standard. They definitely need to be a heavier gauge to compensate since you’re going down. Lighter gauges used for standard tuning will probably be pretty floppy.