How does RJ45 crimping tool work?
When you crimp a cable the metal contact pads inside the RJ45 head will “cut” into the isolated ethernet cable. Most one time used RJ45 connectors will also have a bit in the middle of the connector that will get crushed during crimping, ensuring that the cable doesn’t get pulled out easily from the contact pads.
What are the steps in cable crimping?
Make the Crimp: The crimping process consists of a few additional steps.
- Determine the length of the wire, and strip the end.
- Insert the wire into the crimp.
- Place the crimp and wire into the crimping tool, and ensure that it is perfectly seated inside.
- Remove the crimp, and inspect the wire.
Can you use a CAT 5 crimper on Cat 6?
Cat-6 and Cat-5e should work with either type. The only thing you have to look out for is the crimper/plug combination. If you have used your current crimper/plug combo to make working cables in the past, it should still work with Cat-5, Cat-5e and Cat-6.
What is the difference between Cat 5e and Cat6?
The main difference between CAT5e and CAT6 cable lies within the bandwidth, the cable can support for data transfer. CAT6 cables are designed for operating frequencies up to 250 MHz, compared to 100 Mhz for CAT5e. This means that a CAT6 cable can process more data at the same time.
Will a Cat5 crimper work on Cat 6?
What is the difference between Cat5 and Cat 6?
Compared to Cat5/5e cables, Cat6 cables have stricter performance specifications and significantly higher data transfer speeds at greater distances. They are more tightly wound than Cat5 cables, and the cable conductors and cable sheath are thicker as well.
What is the color code for ethernet cable?
Grey-colored cables typically represent standard ethernet connections, while green cables represent crossover ethernet connections. Yellow cables are used to signify POE (power over ethernet), while blue cables are used for terminal server connections.