How do I fix PCL XL error Subsystem kernel?

If you are seeing the PCL XL error in HP Printers Windows 11/10, you can fix it in the following ways.

Table of Contents

Rename the GPD files related to the printer.
Adjust Printing Preferences.
Update the Printer driver.
Uninstall and fresh install the printer driver.
Run Printer Troubleshooter.

What is PCL XL error?

What is the PCL XL Error? The PCL XL Error typically shows up when a user tries to send multiple documents for printing. One of the primary reasons why this problem occurs is a corrupted printer driver. In some instances, the printer settings can also cause the error to show up.

How do I reset my HP printer memory?

HP LaserJet 4100 and 4101 MFP Series

Press “Power” to turn off the printer.
Press and hold “Select.”
Turn the printer back on while continuing to press “Select.”
Release “Select” when all three lights on the printer are illuminated.
Press and release “Select.” The memory will be reset and then the printer will restart.

How do I reset my printer’s memory?

Turn off the printer and unplug it from the electrical outlet. Leave the printer unplugged for a minute before reconnecting the power to make sure the memory completely loses power. After plugging the printer in and turning it on, wait until the printer finishes its startup sequence before sending a new print job.

Why is my printer printing a PCL XL error?

The printer displays this error message if the printer’s driver has become outdated or corrupted from operating system (OS) updates or conflicting third-party software being installed on the computer. HP has identified the problem printer drivers for most of their printers that display the PCL XL error.

How do I fix PCL XL error Illegalattributevalue?

I request you to follow the below methods:

Method 1:
Run inbuilt printer troubleshooter and check if it works.
Note: If your computer is having problems printing, try using the Printer troubleshooter to fix the problem.
Method 2: Uninstall and Reinstall the Printer’s Driver.
Method 3:
Fix printer problems.

How do you fix a PCL XL error on a Kyocera printer?

Right click on your printer that is having the PCL XL Error, and select Printing preferences. Click the Advanced tab. Change TrueType Font to Download as Softfont, and set Send True Type as Bitmap to Enabled. Click Apply and OK to save the changes.

How do you solve unsupported personality PCL?

Instead, I get a page that says “Unsupported Personality: PCL”. How do I fix this?…If so, switch Drake to GDI.

Go to Setup > Printing > Printer Setup > F8 tab.
Select the problem printer from the drop list.
Select Alternate Print Method (GDI).
Click Update to save the print method selection.

How do I update printer drivers in device Manager?

Update the device driver

In the search box on the taskbar, enter device manager, then select Device Manager.
Select a category to see names of devices, then right-click (or press and hold) the one you’d like to update.
Select Search automatically for updated driver software.
Select Update Driver.

Why does my printer print unsupported personality?

An error page will print with the words “Unsupported Personality: PCL” in the upper left hand corner. The printers are host-based and do not support PCL printing; therefore, installing an alternate PCL5e or PCL6 printer driver will frequently generate this error condition.