What is PopLoc on RockShox?
Product Description RockShox PopLoc sprint remote lever is time-saving ergonomically superior handlebar-mounted remote. Cable actuated system to lockout your fork. Handlebar mounted, remote-control damper adjuster for RockShox forks or rear shocks with remote compatibility.
How much pressure should be in my RockShox?
Max pressure should not exceed 163 psi. Rebound suggestions are set from the full clockwise/full slow position. These suggestions are a recommended starting point. Your riding style, terrain, and bicycle geometry can benefit from further adjustments to tune your suspension for your preferences.
How do I adjust my RockShox?
For recommended rebound settings go to www.rockshox.com/app. After setting sag, adjust the rebound damper, go for a ride, and adjust again as preferred. To decrease rebound speed (slower return), turn the rebound adjuster clockwise. To increase rebound speed (faster return), turn the rebound adjuster counter-clockwise.
When should I lock my suspension?
The best time to lock out the suspension on your mountain bike is when you are doing a long non-technical trail climb or riding a long distance on a flat surface. Lockouts are typically used at specific times to help prevent wasting pedaling energy in the form of bobbing of the suspension.
How much air do I put in a front fork?
Start with the recommended air pressure for your weight. If that is not known, try 100psi. On this fork it said l should be running 75psi for my weight but there was always about 30mm unused travel.
How do I install the poploc cable on a RockShox Fork?
Rotate the compression dial on the top of the right arm of the RockShox fork counterclockwise until it reaches capacity. Depress the button on the PopLoc assembly. Slide one end of the PopLoc cable housing into the hole located on the right-side wall of the assembly. Slide the other end over the nipple, near the compression dial on the fork.
What is RockShox poploc?
RockShox puts this time-saving wonder in the hands of all riders with this ergonomically superior handlebar-mounted remote. PopLoc is available in left or right-specific controls. Some variations of this product featured on this page are not available for purchase and are installed on bicycles as complete bikes only.
How do I change the compression on my RockShox Fork?
Rotate the compression dial on the top of the right arm of the RockShox fork counterclockwise until it reaches capacity. Depress the button on the PopLoc assembly.
How do RockShox Fork cylinders work?
RockShox are front-end mountain bike forks. They have two cylinders and chambers that straddle the wheel. Each leg of the fork has a cylinder that slides up and down inside a cylindrical chamber.