What distance should you zero an EOTech?
You may use a seated or prone position, but the rifle needs to be stably supported. Set up a paper target exactly 25 yards down range of your shooting platform. Zeroing the EOTech at 25 yards will give you an accurate aim point out to 300 yards. Ensure the sight is set to mechanical zero.
What does the NV button do on an EOTech?
When the button labeled NV is pushed, a Genuine EOTECH sight goes into the night vision mode and the intensity of the reticle is reduced substantially to a point that it is not visible by the naked eye. Pressing the NV button again toggles the sight between the normal and night vision modes.
Do you need iron sights with EOTech?
You must do this process utilizing the front and rear iron sights, it will not work without a rear sight. With your EOTECH turned on, look through the rear peep sight with the front post in view. After obtaining a sight picture, adjust the EOTECH so the 1 MOA dot sits directly on top of the front post.
Does EOTech have auto shut off?
The EOTECH is definitely a more intensive product. You have to manage it more than an Aimpoint. If you turn on/adjust the optic with the up arrow brightness setting, the auto shut off is 8 hours. If you turn on/adjust the optic with the down arrow brightness setting, the auto shut off is 4 hours.
How long will an Eotech stay on?
One EOTECH Holographic Weapon Sight EXPS3; Quick-Start Guide; Warranty Card; One CR123 Battery; Protective Case….EOTECH HWS EXPS3-0.
| Reticle | Circle 1-Dot (Night Vision Compatible) |
|---|---|
| Battery Life | 1,000 continuous hours at nominal setting 12 (out of 20 Daylight settings) at room temperature |
Why is my Eotech blinking?
The sight will automatically perform a battery check every time it is turned on. The reticle will blink when the batteries have between 2.5 and 5 hours of useful life left.