Do front load dryers have shipping bolts?
Most tumble dryers will have transit bolt to protect the inside of the machine during transit. Like washing machine drums, tumble dryer drums are quite heavy, and could damage components if they were to move around during shipping. The common types of transit bolt are either manual or automatic.
What size are transit bolts on a washing machine?
They are typically 4 to 12 in (100 to 300 mm) in length, although any size is possible as it depends on the type of device being transported. The most common example of transit bolts is the securing of the drum of a washing machine while it is transported from shop to property (or property to property).
Will washing machine work with transit bolts in?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.
Do you have to remove transit bolts from washing machine?
The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.
Can you move a front load washer without the shipping bolts?
Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. Washing machine transit bolts are a vital piece of equipment required to move your washing machine securely. A washing machine is a complex piece of equipment with many moving parts.
Can I move my washing machine without the transit bolts?
How do you transport a front load washer?
How to Transport a Front Load Washer
- Slide your front-load washer away from the wall far enough to access the power cord.
- Place a bucket on the floor behind your washer.
- Move your washer from the laundry room.
- Find the shipping bolts that were removed when your washer was first delivered.
What happens if you move a washing machine without transit bolts?
What happens if you dont remove shipping bolts from washer?
You need to remove the shipping bolts. If the four shipping bolts of your machine are still attached to the back of the washer, they will cause a loud noise and vibration during the operation of the machine; which can lead to a permanent damage of the washer.
How do you secure a front load washer for moving?
Preventing a washing machine’s drum from excessive motion during your move will protect the suspension from breaking. You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum.
Do you need transit bolts to move a washing machine?
Can you transport a front loading washer on its side?
A front load washer can not be transported laying down. Transporting it on its side, back, or front will cause severe damage. The machine’s internal components will be harmed, and the outer panels of the washer will be scuffed. Always transport a washer in an upright orientation.
Are washing machine transit bolts necessary?
Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. Washing machine transit bolts are a vital piece of equipment required to move your washing machine securely.
How do you put transit bolts back in washing machine?
Push a transit bolt into the transit bolt hole on the back of the washer. Make sure the shaft washer, on the bolt, is in place near the head of the shaft so you don’t scratch or damage the back of the washing machine. The washer also dampens vibrations during transport.
Can you move front load washer without shipping bolts?
Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it.