What is default username and password for ZTE F660?
1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your ZTE F660 is admin. The default password is admin.
How do I change my ZTE modem password?
Change Password to access ZTE F688 Configuration page
- Type 192.168.1.1 and press Enter, User = admin / Password = enter letters as shown below and then press Login.
- At Status > Management & Diagnosis.
- Select Account Management.
- Set up as follows: Old Password : enter Password.
How do I find my Wi-Fi password ZTE?
Type http://setup.zte in the address bar, then press Enter on your keyboard. Enter the password (default is admin), then click Login. Enter the password (default is admin), then click Login.
How do I find the WIFI password on my ZTE router?
How do I find my WIFI password ZTE?
Forgot Login Password? Try hard resetting your router login. To do this, press and hold the small black button found at the back your router for around 10 seconds.
How do I reset my password on my ZTE F660?
And no need to get your breathing rates high in case you have changed the username / password of ZTE F660 and forgot them, as you can just reset the ZTE F660 router by press-and-hold the reset button with a clip for about 15 seconds.
What is ZTE zxv10 W300 wireless ADSL router?
Thank you for using ZTE’s ZXV10 W300 Wireless ADSL Router. Please read this manual carefully before using the product. ZXV10 W300 is an enhanced wireless ADSL use-end access device providing uplinks in multiple line transmission modes.
What is a W300 device?
ZXV10 W300 is an enhanced wireless ADSL use-end access device providing uplinks in multiple line transmission modes. It provides four 10/100Base-T Ethernet interfaces, one 802.11g/b wireless interface and one USB interface (optional). ZXV10 W300 provides the users with broadband Internet or enterprise network access services via
What are the zxv10 W300 factory defaults?
3.2 ZXV10 W300 Factory Defaults Factory defaults are as follows: Device IP address: 192.168.1.1; Subnet mask: 255.255.255.0 Use DHCP server by default. The IP address can be obtained from the device via DHCP. Line coding AUTO (T1.413/G.DMT/G.LITE/ADSL2/ADSL2+ auto-sensing)
How can I contact ZTE for product documentation?
To improve the quality of ZTE product documentation and offer better services to our customers, we hope you can give us your suggestions and comments on our documentation and fax this form to 0086-755-26770160; or mail to “ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China”. Our postcode is 518057.