What is construction activity pollution prevention?
Intent. To reduce pollution from construction activities by controlling soil erosion, waterway sedimentation, and airborne dust.
What is SWPPP BMP?
The SWPPP/WPCP is a document that must assess the site conditions, sources of sediment and other pollutants in Stormwater and non-Stormwater discharges, identify the BMPs that will best suit the construction activities and meet Caltrans and the Clean Water Act pollution control objectives.
What is site assessment LEED?
To assess site conditions, environmental justice concerns, and cultural and social factors, before design to evaluate sustainable options and inform related decisions about site design.
Do I need a Swppp California?
Typically, SWPPPs are only required for construction projects that disturb more than 1 acre of developed or undeveloped land. Additionally, the California Green Building Code (CalGreen) requires SWPPPs for projects that disturb less than 1 acre.
What does BMP stand for environmental?
Best Management Practices
This can be accomplished by implementing what are known as Best Management Practices (BMPs). BMPs are structural, vegetative or managerial practices used to treat, prevent or reduce water pollution. Structural BMPs.
What are 4 pollution prevention examples?
Modifying a production process to produce less waste. Using non-toxic or less toxic chemicals as cleaners, degreasers and other maintenance chemicals. Implementing water and energy conservation practices. Reusing materials such as drums and pallets rather than disposing of them as waste.
What is a requirement of open space LEED?
Requirements. Provide outdoor space greater than or equal to 30% of the total site area (including building footprint). At least 25% of the calculated outdoor open space must be vegetated space planted with two or more types of vegetation or have overhead vegetated canopy.
What standard is used for optimize energy performance?
Appendix G of Standard 90.1-2007 requires that the energy analysis done for the building performance rating method include all the energy costs associated with the building project.
What are 2 examples of Best Management Practices?
URBAN BMPS
- Use Fertilizers Wisely.
- Apply Pesticides Wisely.
- Use Landscaping Practices that Prevent Erosion.
- Wash Your Vehicle Wisely.
- Dispose of Pet Waste.
- Use and Dispose of Household Chemicals Safely.
- Evaluate Existing Roads.
- Proper Planning of Roads.
What is the first step in the process of developing a stormwater pollution prevention plan?
The first step in developing the SWPPP is to identify the stormwater pollution prevention team .
What is the principal pollutant of concern in a SWPPP?
phosphorous or other pollutants of concern because there is a potential for compost leachate to contain high levels of phosphorous or other pollutants. A total maximum daily load, or TMDL, may place additional requirements on a facility that discharges a pollutant of concern.
What is a storm water pollution prevention plan?
An integral part of the Construction Plan includes a storm Water Pollution Prevention Plan. The storm Water Pollution Prevention Plan addresses several issues. First, the plan outlines how erosion and sedimentation will be controlled on the project site to minimize the discharge of sediment off-site or to a water of the state.
What emphasis should be put on designing projects to reduce pollution?
Emphasis should be on designing the project, or modifying the design of a project, to minimize the generation of pollutants in the first place. It will be impossible for current and future landowners to eliminate all potential pollutants.
What is the purpose of a construction site plan?
First, the plan outlines how erosion and sedimentation will be controlled on the project site to minimize the discharge of sediment off-site or to a water of the state. Second the plan addresses other pollutants that may be associated with construction activity. This can include disposal of building materials, management of fueling operations, etc.
What should be included in a construction waste management plan?
Second the plan addresses other pollutants that may be associated with construction activity. This can include disposal of building materials, management of fueling operations, etc. Finally, the plan should also address pollutants that will be associated with the post-construction land use.