How do I reset my Macclean water softener?
1. Press the “Clock Set” button on the water softener control panel; a digital clock appears on the display screen and the hours digits begin to flash. Use the “Up” and “Down” arrow buttons to adjust the hours place digits as desired; press “Next” to advance the flashing to the minutes place digits.
How do I start my water softener for the first time?
To turn on your water softener, plug it in and open the bypass to allow water to flow through the system. Adjusting the controls properly on your water softener will ensure that your pipes remain clear and that you’re receiving softer, cleaner water for your family.
What is the best hardness setting on a water softener?
🤔 What Level Should My Water Softener Hardness Setting Be Set To?
| Water Hardness (GPG) | Iron (PPM) | Hardness Setting |
|---|---|---|
| 20 | .5 | 22 |
| 20 | 1.5 | 26 |
| 20 | 2.0 | 32 |
| 20 | 2.5 | 34 |
Why is my water softener not working?
You’ll have to empty it by hand, then clean it. If the float valve is working properly, the problem may be a clog in the drain control or tubing, or there could be a problem with the timer. If water is not entering the tank, perhaps the float switch is stuck or there is a clog in its tubing.
How do you know if your water softener is regenerating?
The only way to find out if your water softener is regenerating normally is to check the softness of your water. You’ll notice a difference in the water while taking a shower. Or you’ll see limestone deposits in your bathroom walls or taps, and the appliances using water.
How often should I manually regenerate my water softener?
It is generally agreed upon that regular regenerations are the best, because they keep the resin bed active. This should be every two to three days, although highly efficient softeners may generate every day or even multiple times a day.
Do water softeners regenerate automatically?
Most water softeners regenerate (clean itself) based on need, rather than on a set schedule. The frequency of how often the water softener will recharge depends on factors like water hardness level and household water usage.
How often should I set my water softener to regenerate?
Typically, the regeneration should occur after every 12 to 14 days or it should occur after a predetermined gallons of water that you use. You can set the number of gallons used before it regenerates through the water softener’s valve.
How do I know what water softener setting to use?
If Iron is Present Once you know how much iron your water contains, you can work out your softener’s hardness setting. For every 1 PPM (part per million) of iron, add 4 to your total hardness number. So, if your test results show that your water contains 1 PPM of iron, add 4 to your overall hardness number.
What happens if you set your water softener too high?
Soft water provided by a utility does not need additional softening and may cause corrosion issues for your home. Make sure the softener is set to the hardness of your water supply. If the hardness is set too high, the softener will cost more to operate and waste water, costing you extra money.