What is cable test in MikroTik?
Cable test can detect problems or measure the approximate cable length if the cable is unplugged on the other end and there is therefore, “no-link”. RouterOS will show: which cable pair is damaged.
What is ether MikroTik?
Etherboot mode is a special state for a MikroTik device that allows you to reinstall your device using Netinstall.
What is combo port in MikroTik?
Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS.
What is Torch MikroTik?
MikroTik Torch is a real-time traffic monitoring tool that can be used to monitor the traffic flow through an interface. Traffic that appears in torch is before it has been filtered by a Firewall. This means you will be able to see packets that might get dropped by your Firewall rules.
What is the password of MikroTik?
The default login and password for MikroTik routers is ‘admin’. There is no password required.
What is MikroTik default IP?
Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password.
Where is MikroTik in my network?
Just start it, on Neighbors tab, click on refresh and you should see your new router. You can connect to it by MAC Address (no need to change your IP if you have fixed IP to some other subnet) or by IP address if you allow your PC to get address from DHCP server Mikrotik offers by default (subnet 192.168. 88.0/24).
What is RoMON MikroTik?
RoMON stands for “Router Management Overlay Network”. RoMON works by establishing an independent MAC layer peer discovery and data forwarding network. RoMON packets are encapsulated with EtherType 0x88bf and DST-MAC 01:80:c2:00:88:bf and its network operate independently from L2 or L3 forwarding configuration.
Is MikroTik a modem or router?
The new MikroTik flagship with the power of a whole fleet. Unleash the power of 100 Gigabit networking with L3 Hardware Offloading! This router can be a handy drop-in upgrade for existing CCR1072 setups.