What are the requirements to fly in RVSM airspace?

The package must consist of at least the following: (1) An identification of the RVSM aircraft group or the nongroup aircraft; (2) A definition of the RVSM flight envelopes applicable to the subject aircraft; (3) Documentation that establishes compliance with the applicable RVSM aircraft requirements of this section; …

Table of Contents

What does RVSM mean in aviation?

Reduced Vertical Separation Minimum
Reduced Vertical Separation Minimum (RVSM)

How do I get RVSM approval?

Step 1: Certifiable Aircraft. The first step to getting RVSM approval is identifying whether your airplane is equipped for RVSM flight operations.
Step 2: RVSM Manual and FAA Application.
Step 3: Pilot Training.
Step 4: FAA Review.
Step 5: FAA Approval.
Step 6: Height Monitoring Flight.
Step 7: Continuing Compliance.

How often is RVSM height monitoring required?

every two years
Aircraft accessing RVSM airspace are required to verify altitude-keeping performance for initial authorization, and then every two years or 1,000 hours, whichever comes first.

What altitude is RVSM airspace?

2,000 feet
Within airspace where RVSM procedures are suspended, the vertical separation minimum between all aircraft will be 2,000 feet above FL290.

Can you hand fly in RVSM airspace?

(a) Except as provided in paragraph (b) of this section, no person may operate a civil aircraft in airspace designated as Reduced Vertical Separation Minimum (RVSM) airspace unless: The operator and the operator’s aircraft comply with the minimum standards of appendix G of this part; and.

Is RVSM training required?

Additionally, pilots operating under Part 91K, Part 121, and Part 135 are required to complete recurrent RVSM training every 12 calendar months.

Is RVSM manual required?

Carrying the RVSM manual on board is only a regulatory requirement when the Operations Specifications, Letter Of Authorization or the FAA-approved RVSM maintenance manual states that you must have it on board.

What altitudes are RVSM?

RVSM reduces vertical separation between FL290 and FL410 from 2,000 feet to 1,000 feet for those aircraft approved for operation within these altitude strata.

What is an RVSM check?

Reduced Vertical Separation Minimum (RVSM) is defined as the reduction of vertical space between aircraft from 2,000 to 1,000 feet at flight levels from 29,000 feet up to 41,000 feet.

Does RVSM require TCAS?

A traffic collision avoidance system (TCAS) is not required to enter RVSM airspace. The only requirement is that if TCAS II is already installed, it must be updated to TCAS II Version 7.0 or later.

Can you fly in RVSM without TCAS?

Is TCAS Required for RVSM? A traffic collision avoidance system (TCAS) is not required to enter RVSM airspace. The only requirement is that if TCAS II is already installed, it must be updated to TCAS II Version 7.0 or later.

Is autopilot required for RVSM?

But generally, no, you need the autopilot engaged while in level flight in RVSM airspace.

Does ADSB replace RVSM?

The ADS-B Out system does not affect the ability of the aircraft to meet RVSM altimetry system performance requirements. Any discussions that reflect the suggestion that the rule change is about using ADS-B Out in lieu of RVSM performance standards should be wholly rejected.

What are the RVSM contingency procedures?

Contingency procedures when unable to maintain RVSM The pilots shall notify ATC of any equipment failure, weather hazards such as severe turbulence etc., which may affect the ability to maintain the cleared level or the RVSM requirements.

Is VFR allowed in RVSM?

AFAIK VFR is somewhere allowed even above FL285 in RVSM airspace (where VFR is generally forbidden) with some arrangements (airspace reservation or something like that).

Is ADS B required for RVSM airspace?

The RVSM application process will be eliminated entirely after Jan. 1, 2020, when all aircraft operating in RVSM and other controlled airspace must be ADS-B equipped.

Is RVSM LOA still required?

Under new regulations that became effective on January 22, 2019, Part 91 operators now have a path to authorization for RVSM operations without the need for a Letter of Authorization (LOA).