Which way does grease zerk face on u-joint?
End of dialog window. The correct orientation for u-joint installation is to position the grease zerk so that it is on the compression side rather than tension side of the joint with respect to the drive force applied through the u-joint.
Can you over grease U-joints?
IMHO u-joints tend be over greased if anything. Heck most vehicles anymore have sealed bearings. Unless extreme angles or loads are involved, I’m fine with yearly or monthly depending on usage.
Are Spicer U-joints pre greased?
New Spicer Service-Free (SF) light-duty and medium-duty U-joints are shipped pre-lubed, with the bearings installed on the cross trunnions. It is not necessary to grease them after installation.
Can you over grease U-joint?
Is Lithium grease good for U-joints?
The best type of grease to use on U-Joints is MOLY grease. This grease is certified for this purpose. You can also use lithium-based EP NLGI 2 Grease, which is of high quality. This grease is also water-resistant and prevents the joints from corrosion and rust.
How much power can a 1310 U-Joint handle?
According to Spicer, the 1310 joint is rated at 400 lb-ft of continuous torque (down the track) and 800 lb-ft of short-term torque (launch at the line). The 1330 has the same size caps as the 1310, but the U-joint cross is the same size as a 1350.
How much torque can a 1310 U Joint handle?
According to Spicer, the 1310 joint is rated at 400 lb-ft of continuous torque (down the track) and 800 lb-ft of short-term torque (launch at the line).
What are Spicer extreme U-joints?
durable Spicer Extreme u-joints, meant for off-road use and slower speeds. Featuring an SAE-4340 nickel chromoly steel cross with an enlarged trunnion diameter for added strength, these u-joints are virtually indestructible.
Are Spicer driveshaft U-joints good?
Spicer ® 10 Series U-Joints Spicer 10 Series driveshaft u-joints and other u-joints are manufactured using statistically controlled processes to ensure high quality. Zerks on both sides allow for thorough lubrication to maximize part life, and a steel journal cross ensures optimal strength and durability.
Are Spicer U-joints available for off-road use only?
Available for Off-Road Use Only: Spicer Extreme™U-Joints Ask your Spicer Performance Rep about super strong, super durable Spicer Extreme u-joints, meant for off-road use and slower speeds. Featuring an SAE-4340 nickel chromoly steel cross with an enlarged trunnion diameter for added strength, these u-joints are virtually indestructible.
Why choose Spicer® blue-coated performance U-joints?
Spicer®Blue-Coated Performance U-Joints We made Spicer u-joints for Dana axle shafts even tougher by covering them with a high-performance, high-durability blue coating. Tests results prove that these coated u-joints stand up to the corrosive effects of the elements better than the competitor’s uncoated product. Spicer U-Joint