What size is Cat 0 3 point hitch?
5/8 inches
Category 0 We define the smallest category by upper and lower link pins measuring 5/8 inches in diameter. The spacing between the two lift arms is approximately 20 inches.
How do I know what category my 3 point hitch is?
The easiest way to differentiate the categories is by the lift arm pin diameter, which ranges from 5/8 in (16 mm) to 2 in (51 mm).
What size is a category 3 hitch pin?
Three-point hitch specifications
| Category | Hitch pin size | Lower hitch spacing |
|---|---|---|
| 1 | 19 mm (3/4″) | 718 mm (26″) |
| 2 | 25.5 mm (1″) | 870 mm (32″) |
| 3 | 31.75 mm (1 1/4″) | 1010 mm (38″) |
| 4 | 45mm (1 3/4″) | 1220 mm (46″) |
What diameter is a Cat 3 pin?
| Category 2 | Category 3 | |
|---|---|---|
| Upper link pin diameter | 25.4 mm (1.00 in.) | 31.75 mm (1.25 in.) |
| Upper link hole diameter | 25.65 mm (1.01 in.) | 32.00 mm (1.26 in.) |
| Lower link pin diameter | 27.94 mm (1.10 in.) | 36.58 mm (1.44 in.) |
| Lower link hole diameter | 28.70 mm (1.13 in.) | 37.34 mm (1.47 in.) |
What size is Cat 3 top link?
Cat. 3 Top link pins = 32mm (1 1/4″) dia.
What is the lift capacity?
Lift capacity is the maximum weight of the implement that the hydraulic system can lift. More the lifting capacity, heavier and larger the implement that can be used. In general, lift capacity is directly proportional to HP.
What is a standard hitch pin size?
There are two types of hitch pins, Threaded or Smooth, available in standard or locking. Threaded hitch pins are the same size (1/2” x 13 Threads Per Inch) for 1-1/4” and 2” receiver racks.
What is 3 point lift capacity?
Standard lift capacity at the three-point hitch is 8,388 pounds for Value tractors, 9,213 pounds for T6 Plus and Elite tractors and 11,649 pounds for T6 tractors equipped with Dynamic Command ™ and Auto Command™ CVT.
How do you calculate lift capacity?
SHORT TONS: Multiply cubic feet capacity times weight of product per cubic foot and divide by 2,000. METRIC TONS: Multiply cubic feet capacity times weight of product per cubic foot and divide by 2,204.62. For engineering purposes, Maxi-Lift recommends using water level capacity as the basis for calculation.
What is the standard width of 3 point hitch?
| Category 2 | Category 3 | |
|---|---|---|
| Lower link hole diameter | 28.70 mm (1.13 in.) | 37.34 mm (1.47 in.) |
| Lower hitch point Span (1) | 825 mm (32.48 in.) | 964.95 mm (37.99 in.) |
| Width of ball (2) | 44.96 mm (1.77 in.) | 44.96 mm (1.77 in.) |
| Pin centerline – Lower to upper (3) | 610.11 mm (24.02 in.) | 685.04 mm (26.97 in.) |
How do I know my hitch rating?
Your hitch system is only as strong as its lowest-rated component.
- Hitch rating. Your hitch’s maximum tow weight rating can usually be found on a label on the hitch itself.
- Hitch ball rating. Your can find your hitch ball rating on the top of the ball, or around the base of the shank.
- Ball mount rating.