How do I reset my Canon MP237 ink cartridge?
Off the pressure button STOP/RESET and hold pressure on the power button. On the position of the power button still depressed, you should also compensate by pressing the STOP/RESET until 6 times then release simultaneously with the power button.
How do I fix error 5B00?
Firstly, unplug the power and the USB cables from the printer. Open the cartridge door and press down the Power button. Continue to hold the Power button while plugging the power cord into the wall socket. Keep holding the Power button until the printer starts resetting itself.
How do you use a Canon Resetter?
1 Factory Reset
- Press Setup.
- Press the arrow buttons until you navigate to Device settings and then press OK.
- Press the arrow buttons until you navigate to Reset setting and then press OK.
- Press the arrow buttons until you navigate to Reset all and then press OK.
- Select Yes.
- Press OK. Your device is now reset.
How do I fix error code 5B00?
Reset the waste ink counter Open the cartridge door and press down the Power button. Continue to hold the Power button while plugging the power cord into the wall socket. Keep holding the Power button until the printer starts resetting itself. Once all the lights are on, you may release it.
How do I fix my Canon ink absorber is full?
Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.
How do I fix a Canon printer error 5B00?
What can I do if I get the Canon printer error 5b00?
- Reset the waste ink counter. Firstly, unplug the power and the USB cables from the printer.
- Manually clean the waste ink pad. Open the ink cartridge compartment.
- Other potential solutions. If the print head is not clean, this can often lead to this error.