What size is a 3/8 socket in MM?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
What is 42mm in standard?
Standard / Metric Wrench Conversion Chart
| Bolt Diameter | Standard | Metric |
|---|---|---|
| 1-3/8″ | 35mm | |
| 1″ | 1-1/2″ | 38 mm |
| 1-5/8″ | 41mm | |
| 1-1/8″ | 1-11/16″ | 43mm |
What size is a 3/8 in metric?
SAE to Metric Conversion Chart
| Standard (SAE) | Metric (mm) | Inches (decimal) |
|---|---|---|
| 3/8″ | 9.525 mm | 0.375″ |
| 10 mm | 0.394″ | |
| 13/32″ | 10.3188 mm | 0.406″ |
| 11 mm | 0.433″ |
Is 8mm and 5/16 the same?
8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch. 11mm = almost 7/16 inch.
Are 8mm and 5/16 the same?
How close is 5/16 to 8mm?
0.31496 Inches
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 7mm | Little over 1/4 Inch | 0.27559 Inches |
| 8mm | 5/16 Inch | 0.31496 Inches |
| 9mm | Just short of 3/8 Inch | 0.35433 Inches |
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
Are m10 and 3/8 the same?
That said, they are very close, the 3/8″ bolt is about 0.019″ smaller and the pitch’s are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..
What is 7/16 of an inch in mm?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.438” | 7/16” | 11.13 mm |
| 0.500” | 1/2” | 12.70 mm |
| 0.563” | 9/16” | 14.30 mm |
| 0.625” | 5/8” | 15.88 mm |
Are M8 and 5/16 interchangeable?
M8 and 5/16 are different bolts. M8 and 5/16 are not compatible. It is not recommended to use a M8 bolt into a 5/16 thread (and vice-versa), otherwise you run the risk of forcing and damaging the thread.