What is maximum moving dimensions Indian Railways?
Maximum Moving Dimensions (See Diagram B)
| Note :—These dimensions shall not be adopted in designs of Rolling stock without the special sanction of the Railway Board in each case. | ||
|---|---|---|
| Maximum Moving Dimensions : | ||
| 11. | Maximum width over all projections :- | |
| (i) at 102 mm. above rail level, when fully loaded. | 2440 mm |
What is the maximum axle load for rails of 52 kg per meter?
Following is the rule used for determining the maximum axle load of a given rail section. Maximum axle load = 512 * Weight of rail section in kg per meter or Ibs per yard.
What is the weight of one rail?
The weight of rail, for principal main-line use, is from about 55 kg per metre (about 110 pounds per yard) to 65 kg per metre (130 pounds per yard).
What is the height of the rail?
India. There are two standard heights of the platforms, 200 mm (7.9 in) and 760 mm (29.9 in) above rail heads.
How wide is a railway platform?
Railway Group Standard GI/RT7016 gives the minimum unobstructed width of a platform as 2,500 mm. This distance is 33 mm for 00 gauge. The width of the model platform can be set to 33 mm, or the space available, whichever is the greater.
What is rail scale?
Rail scales, as you might guess, are scales installed in train rails to measure the weight of train cars as they travel. Scales can measure if the cars are too heavy and could be dangerous or if the weight has changed throughout the journey.
What is the weight of a rail?
Most new rail in North America weighs 57.5 or 66 kg per metre (115 or 132 pounds per yard). The standard American rail section has a length of 12 metres (39 feet). Some ore mining railroads in Western Australia employ rail weighing about 68 kg per metre (about 136 pounds per yard).
What is the length of rail for BG?
Indian Railways has standardized a rail length of 13 m (previously 12.8 m) for broad gauge and 12 m (previously 11.8 m) for MG and NG tracks.
What is the length of a rail?
The standard American rail section has a length of 12 metres (39 feet). Some ore mining railroads in Western Australia employ rail weighing about 68 kg per metre (about 136 pounds per yard). One of the most important developments is the welding of standard rails into long lengths.
What is the height of 52 kg rail section?
The number of sleepers used for rail varies from, when n = Length of rail in metres….
| Q. | The height of the rail for 52 kg rail section is |
|---|---|
| A. | 143 mm |
| B. | 156 mm |
| C. | 172 mm |
| D. | 129 mm |
What is the length of railway platform?
Today, new platforms are built as 160 metres, with the older existing platforms measuring around 150-160 metres, while most current trains are about 144 metres long. In some spots, you can see where they’ve been measuring platforms to verify the length.
What is the minimum size of platform?
Platform to be wide enough to accommodate the entire train load of passengers. The suggested yardstick for the width of a platform is 1.5 m2 per passenger for main line and 1.0 m2 per passenger for suburban trains. Minimum width of platform to be 3.66 m.
What is platform height?
Essentially, the platform height is the height at which the platform can be raised – in other words, the distance between the platform and the ground. Meanwhile, the definition of working height is equated to the area that an average person can reach while stood on that platform.
What is N scale in MM?
N scale is a popular model railway scale. Depending upon the manufacturer (or country), the scale ranges from 1:148 to 1:160. In all cases, the gauge (the distance between the rails) is 9 mm or 0.354 in.
What is the weight of Indian train engine?
Indian locomotive class WDM-2
| Specifications | |
|---|---|
| Loco weight | 112,800 kg (248,700 lb) |
| Fuel type | Diesel |
| Fuel capacity | 5,000 L (1,100 imp gal; 1,300 US gal) |
| Prime mover | ALCO 251-B |
What are the Indian Railway standard specifications?
List of Indian Railway Standard Specifications : S. No. Description Specification No. Corrigendum No. 1 2 3 4 Fishplates IRS T1 – 1966 6 of July, 92 IRS Dog spikes IRS T2 – 1966 3 of May, 73 IRS Round spikes IRS T4 – 1966 3 of May, 73 Rectangular M. S. Bearing plates IRS T5 – 1965 2 of Sept., 86.
What are the track parameters of Indian Railways?
The track parameters shall be the following: Gauge Broad Gauge 1676mm Schedule of dimensions Indian Railways Schedule of Dimensions for Broad Gauge (1676mm). Revised, 2004 Sharpest curve to be negotiated 175 m radius (horizontal); 2500 m radius (vertical) Sharpest reverse curve to be negotiated 175 m radius (horizontal) back to back with or wi…
What are the specifications and standards for electric locomotives?
1. 1. 1 The Electric Locomotives shall conform to the technical requirements of design, development, manufacture, testing, supply, delivery, commissioning and maintenance of 1676 mm gauge 7000 kW IGBT based 3-phase drive electric locomotives, for use by the Indian Railways as per the Specifications and Standards set forth herein. 1. 1.
What is the standard length of a railway track?
The standard length of rails shall be 13m or 26m. However, in case rails are to be procured in longer lengths, the same shall be prescribed by the purchaser. The manufacturer shall be entitled to supply in pairs short lengths up to 10% by weight of the quantity contracted for or ordered.