What is 00 grease used for?
Super S “00” Grease is a lithium-based, low temperature semi-fluid with anti wear and corrosion inhibitors that can be used in all makes of cotton pickers. A combination of highly refined base oils, lithium soap, and a unique anti-wear additive help to protect critical parts in high wear areas extending service life.
What is Type 00 grease?
Champion “00” EP Pour Grease is an excellent multi-purpose, lithium-based extreme pressure lubricant for applications which require NLGI #00 consistency semi-fluid grease. Provides protection against rust and corrosion, and protection from scuffing and wear in extreme pressure applications.
What Nlgi 00?
The National Lubricating Grease Institute (NLGI) is a not-for-profit organization that serves the lubricating grease industry. The NLGI consistency number, sometimes referred to as NLGI grade, refers to the relative hardness of a grease used for lubrication as specified by the institute’s standards.
What are the different grades of grease?
Grease Properties Greases are classified into nine consistency grades (000, 00, 0, 1, 2, 3, 4, 5, 6) established by the National Lubrication and Grease Institute (NLGI). NLGI #000 greases are nearly fluid, while NLGI #6 greases are nearly solid.
What can I use instead of 00 grease?
An NLGI #2 grease has a higher proportion of thickener than an NLGI #00 grease. Consequently, it is possible to achieve an NLGI #00 grease by mixing an oil with an NLGI #2 grease, assuming the mixtures are of similar oils and thickeners.
What weight is John Deere corn head grease?
Contains anti-rust properties. 14-oz.
What is the difference between 0 and 00 grease?
The scale ranks as follows: 000 is very fluid, 00 is semi-fluid, 0 is fluid, 1 is soft, 2 is medium, 3 is medium-hard, 4 is hard, 5 is very hard, and 6 is block. The lower numbers (from 000 to 1) are softer and easier to pump over longer distances.
What do numbers mean on grease?
The NLGI consistency number (sometimes called “NLGI grade”) expresses a measure of the relative hardness of a grease used for lubrication. The higher the NLGI number, the firmer/thicker the grease. The NLGI consistency number alone is not sufficient for specifying the grease required by a particular application.
What is grease number?
The NLGI number is a measure of the grease’s consistency as indicated by its worked penetration value. The penetration test measures how deep a standard cone falls into a grease sample in the tenths of millimeters. Each NLGI grade corresponds to a specific worked penetration value range.
What grease goes in snowblower gearbox?
80-90 non syn gear oil. leave the machine level and pump it in there till it runs clean oot the hole. if grease is used then use ride the white lightning lithium grease.
Can you over grease gears?
However, too much grease can be harmful, particularly in an enclosed system. Excess grease will cause agitation, viscous drag and result in power loss. Splash lubrication is used with an enclosed system. The rotating gears splash lubricant onto the gear system and bearings.
What is the best grease for metal gears?
For appliance and other high-load, low-speed, metal gearing, Instrument Grease 794A is the recommended lubrication solution.