Is a 4 post lift worth it?
the extra amount you’ll spend on a 4 post car lift will probably be worth it for the extra convenience and versatility. budget car lifts might take longer to raise and lower your vehicle and operate louder when doing so. the weight of the vehicle you’ll be lifting will impact how much you pay for a car lift.
How thick should a concrete Rotary Lift be?
What are the Concrete Requirements for Rotary Lifts?
| Lift Model # | Anchor Size – ANSI/ALI ALCTV: 2006 Standard | Min Concrete Thickness- ANSI/ALI ALCTV: 2006 Standard |
|---|---|---|
| VLXS7, VLXS10 | 3/4″ x 5-1/2″ | 4-1/4″ (108mm) |
| RFP9 | 3/4″ x 5-1/2″ | 4″ (102mm) |
| RFP14 | 3/4″ x 5-1/2″ | 4″ (102mm) |
| RTP9 | 3/4″ x 5-1/2″ | 4-1/4″ (108mm) |
Can you put a lift on 4 inch concrete?
How thick should a concrete car lift be? The recommended thickness for a car lift concrete slab is 4 inches minimum for most two-post lifts and four-post lifts. Additional thickness may be required for specific applications or different car hoist models.
How much room do I need for a 4 post lift?
Your garage needs enough space before you can install an auto lift. The typical measurements for a 4-post car lift is 103 inches wide by 173 inches long. Most passenger cars have a length of approximately 16 to 17 feet. If the cars you work on fall in this range, then this type of lift may be right for you.
How thick should concrete be for 4-post lift?
4‐1/4″
Pre-Existing Minimum Floor Requirements:
| TWO‐POST MODELS | MIN. THICKNESS | MIN. COMP. STRENGTH |
|---|---|---|
| 4‐POST LIFTS | MIN. THICKNESS | MIN COMP. STRENGTH |
| HD‐7 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
| HD‐9 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |
| GP‐9 SERIES MODELS | 4‐1/4″ | 3000 PSI / 28 Day Aging |