How do you install a toilet paper holder without a side wall?

Without reachable side walls, you can still wall-mount your toilet paper holder on the wall behind the toilet. Mount it about 8 inches higher than the bowl, or about 24 to 26 inches above the floor. If most people in your family are right-handed, mount it on the right side of the tank if wall space allows.

Table of Contents

Where does the toilet paper holder go on the wall?

Install your toilet paper holder on a wall 8 inches to 12 inches from your toilet bowl. (Use 8 inches to 9 inches for shorter users such as children and 10 inches to 12 inches for average to tall users). The best height for a toilet paper holder is 26 inches from the floor.

What side should toilet paper holder go on?

There’s no specific code that dictates where toilet paper holder placement should be in a bathroom, or which side of the toilet it should be on, for that matter.

Where do you hang the toilet roll holder?

Where should you position a toilet roll holder?

Height Placement According to the NKBA, a wall-mounted toilet paper holder works best if installed 26 inches above the floor, on center. “On center” means that the center of the holder, as opposed to the bottom or top of it, is 26 inches above the floor.

Should toilet paper holder be on the left or right?

Are You putting your toilet paper on the holder properly?

Take a roll of toilet paper and slide the central cardboard tube over the paper holder. Then, squeeze both sides of the paper holder inward and position the paper holder between the two roller holders. Release the spring loaded sides and make sure that the toilet paper rolls easily. Your toilet paper holder is now installed and ready for use.

How to make a simple paper towel holder?

13-14 inches long pallet board (the width should 5 inches or more)– serve as a backboard

1-1.3 inches diameter with an 11.3-12 inches long,wooden dowel – serve as a holder of the paper towel (your broken brooms handle will do)

4-6 inches wide pallet board -serve as a holder of the wooden dowel

Screws enough to connect the wood to the concrete

How to install a toilet paper holder in a bathroom?

– Drill pilot holes through your pencil marks. – If you must attach your toilet paper holder to dry wall, tap in wall anchors to make sure the brackets will hold. – Use a level to check drill holes and adjust if necessary.

What is the standard placement of a toilet paper holder?

The height of the toilet. The main element to consider when determining the toilet paper dispenser’s appropriate height is the toilet’s height.

Standard height. The conventional height of a toilet is 35 cm from the floor to the top of the basin.

Proximity to the vessel.

Size.