What is the difference between the hypertherm 45 and 45xp?
A major difference between the 45 and the 45 XP is Hypertherm’s focus on user experience. On the 45, the control panel was spread illogically over the machine. For instance, the power button was on the back, making it a hassle to get to. With the 45 XP, everything is much easier to access.
Is hypertherm made in the USA?
Hypertherm takes great pride in offering products that are designed and built in New Hampshire, USA. With over 40 years of metal cutting experience, their products are among the best in the world.
Is hypertherm a good plasma cutter?
Hypertherm Powermax30 Plasma Cutter – Best Overall For our top pick, we’ve chosen the Hypertherm Powermax30 XP. It’s one of the best plasma cutters for home use, as it’s available at a low price while offering more than enough of the features a hobbyist would need.
How many amps does a hypertherm 45 use?
Specification
| Input voltage/Input current (single phase) | 240v 1 phase/ 33 amps (50 Amp Breaker required) |
|---|---|
| Duty Cycle @ 40Fc | 45 amps @ 50% |
| Dimensions (L x W x H) | 426 x 172 x 348 mm |
| Weight with torch | 16 kg |
| Air supply flow rate | 170 l/min |
How thick can a 45 amp plasma cutter cut?
This is the new digitally controlled 20-55 amps Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, the CUT-45M Air Plasma Cutter cuts a thickness of 2/5 in. with the max severance thickness at 3/4 in.
Where is hypertherm?
Hanover, New Hampshire
Hypertherm is located in Hanover, New Hampshire, United States .
How long do plasma torch consumables last?
about 1 to 3 hours
Usually, in normal conditions, we can say that the electrode will wear out first during machine cutting. Typical life time of a set of consumable should last about 1 to 3 hours for about 120 A of mechanized cutting, it’s in function of the job.
How fine can you cut with a plasma cutter?
What a Plasma Cutter Can Cut. Any kind of metal that is electrically conductive is well suited for using the plasma cutter. You can cut these kinds of metal from a sheet metal thickness of 1-2mm up to 1-2 inches. Anything thicker is going to be tricky.
Is a plasma cutter worth it?
Plasma cutters also cut quickly and efficiently. Plasma takes one-fourth of the time of most similar techniques to make a clean break in a piece of workable metal. Fast process times also minimise the risk of metal abrasion, cuts made in error, or distortion.
What is torch height control?
The torch height control uses arc voltage to maintain a consistent distance from the plate while the torch is cutting. This allows the system to maintain proper torch height regardless of variations in the material, or flatness of the cutting bed.
Do plasma cutters actually use plasma?
How, exactly, does a plasma cutter work? Well, this tool sends an electric arc through a gas that is passing through a constricted opening. With this extreme heat, plasma cutters elevate the temperature of the gas and convert it to the fourth state of matter, called plasma.
What is the difference between Hypertherm PowerMax 45 vs 45xp?
Compare Hypertherm Powermax 45 vs 45XP Specs Product 45 45XP Variations Plasma System 20ft Hand Torch Variations Plasma System 25ft Mechanized Torch Variations Plasma System 50ft Hand Torch Price Discontinued $$
What happened to the powermax45 power supply?
The Powermax45 ® 45-amp plasma power supply was last manufactured in September 2016, and is no longer available for sale from Hypertherm. We continue to make original replacement torches, consumables, and repair parts. The Duramax ® torch is also available for use with this power supply.
Does Hypertherm still support the Duramax torch?
The Duramax ® torch is also available for use with this power supply. Hypertherm’s Technical Service department still continues to support this model. However, technical documentation for self-service is available in our Documents Library.