Where is XtraView settings on decoder?
To check the status from the xtraview settings menu, first, click on the help option. It will bring up a menu, and you can click on the general information option. Among the options available here is the extra view status check, and you can click on it. It will show the status of all your connected decoders.
What are extra view settings?
How does extra view work? Extra view works by linking one or two secondary decoders to a primary decoder. This enables the decoders to share a single subscription. But, you can only link a maximum of two secondary decoders to a primary decoder.
How does DStv extra view work?
XtraView is a way to keep the whole family happy. With XtraView, you can link either two or three decoders together under ONE subscription (and only pay a monthly Access Fee for the other decoders). When linking two decoders, you will pay your normal monthly subscription plus ONE Access Fee.
Why my PVR is not working?
Restart your modem, PVR and digital boxes – in this order: Unplug the modem, wait 5 seconds, then plug it back in. Once the modem is running, unplug and plug in the PVR. Then, if necessary, unplug and replug any other digital boxes that were not working.
How do I connect my DStv HD PVR 2 P?
Connect an RF cable to the RF OUT connector on the PVR and then to the TV Link. Connect the TV Link to the RF input on your TV. Refer to 3 on the illustration above. Connect the Audio/Video cable to the video and variable audio outputs of the PVR and then to the video and audio inputs on your TV.
How do I connect my DStv HD PVR 2 U?
How do I reset my PVR?
9400 – Whole Home PVR
- If you can’t see any picture on your TV, reset your receiver by pressing and holding the POWER button for 5 seconds.
- On your Satellite TV remote, press MENU.
- Scroll to and select System Setup.
- Scroll to and select Factory Defaults.
- Read the warning and select Yes.
How do I connect my HD PVR 2P decoder for extra view?
Connect Explora 1 and HD PVR 2P Decoder to Xtra View The Explora will be Unicable/satcr. Run your HB cable from the RF out of the HD 2P PVR to the RF IN of the Explora 1. Confirm your connection and call Multichoice to activate your Xtraview on the primary decoder.
How to check the status of your XtraView Decoder?
You can first navigate through the settings to check the xtraview status of your decoder. It is a simple process, and you can find the guide in your decoder manual. To check the status from the xtraview settings menu, first, click on the help option. It will bring up a menu, and you can click on the general information option.
What is the Xtraview option?
Xtraview is an innovative option from Multichoice that allows you to have several decoders at once. With this option, you won’t need to pay for separate subscriptions for all your decoders. Everyone in your house can watch their preferred channels on different TVs without interfering with the experience of other household members.
How to set up hdpvr2p on the exploration?
Go to the network settings on the Exploration and see which user bands are in use for tuners 1,2,3. If still at defaults it should be use band 0 ,1,2. Then go to the HDPVR2P network settings sarcr universal. Press the white edit button and a second screen will pop up. Check the user bands for tuner 1 and 2.
Which decoders can be used with Multichoice Xtraview?
Please see various examples below of Multichoice Xtraview Configuration guidelines and more advanced installations using a combination of either single view decoders, HDPVR decoders or Multichoice Explora using Twin LNB with Multiswitch, SATCR LNB or DSTV SmartLNB.