What is the best grain weight for 30-06?
180-grain
30-06 is probably better and more versatile than it ever was. With a good 150-grain bullet it shoots flat enough for just about any deer hunting you can think of and is just fine for the largest whitetail and mule deer. With a 180-grain bullet it’s awesome for elk, black bear, and moose.
Is a 165 grain bullet good for deer?
While either the 150 or 165 will work fine on deer, the 165 will penetrate better, open a bit slower at close range, and will have nearly the same trajectory.
Is 150 grain deer good?
Mag. The biggest buck I’ve ever killed in my life fell to a 150-grain Winchester Ballistic Silvertip out of a . 308, and that load is still a go-to for that rifle. Most rifles shoot them well, in my experience, on deer-sized game, the only real downside is a little meat damage on shoulder shots.
Is 165 grain enough for moose?
30-06 is very popular for moose hunting. The all time favorite Federal Premium 180gr Nosler Partition is a great start. I suggest not go lower than 165gr in bullet weight. The 165/168 Barnes bullets work great on moose if your rifle likes them.
Is a 150 grain bullet good for moose?
The best bullet weight for moose hunting in a standard . 308 caliber rifle is going to be in the 150 to 168 grain range. The 150 will offer the best trajectory (not too much drop) and will be highly accurate.
What is the longest shot with a 30-06?
1000 yards
Although the cartridge was originally designed for ranges of 1000 yards and beyond, reality must be addressed. Yes, you can shoot the . 30-06 at 1000 yards, but today’s ballistics do include cartridges with a flatter trajectory.
Is a 150 grain bullet good for elk?
Elk bullets must be tough enough to provide adequate penetration. Choose at least medium weight for caliber: 140 grains in 6.5mm and the lighter 7mms; 140 and 150 grains in . 270s; 150 to 160 grains in faster 7mms; 165 or 180 grains in .
What is the best 30-06 bullet for deer?
The 5 Best . 30/06 Big-Game Loads
- Federal Fusion 150-Grain. This is an affordable and highly effective load for deer- and hog-size game.
- Federal Premium 180-grain Nosler Partition.
- Winchester Expedition 180-grain AccuBond CT.
- Buffalo Bore 168-grain Barnes TTSX.
- Hornady Lite 125-grain SST.
Is 150 grain enough for moose?
Is 150 grain enough for elk?
Elk bullets must be tough enough to provide adequate penetration. Choose at least medium weight for caliber: 140 grains in 6.5mm and the lighter 7mms; 140 and 150 grains in .
Is a 150 grain bullet better than a 500 grain bullet?
That’s a significant advantage for the 150s at 400 yards. At 500 it’s more theoretical because nobody should shoot at an unwounded big-game animal that far away. The 150-grain bullets also pretty well carry the same energy as 180-grain bullets.
What is the best bullet for 30-06 reloads?
The 150 and 165 grain bullets work well in the .30-06 with medium burning rifle powders, while the slower burning powders offer the best performance with 180 grain and heavier bullets. H414, H4350, IMR 4350, IMR 4831, and W760 have long been used in .30-06 reloads The .30-06 is offered in a wide variety of rifles.
What is the maximum load capacity for a 165 grain bullet?
The Sierra Manual shows that 47.5 grains of IMR 4350 powder behind a 165 grain bullet gives a MV of 2400 fps. A maximum load of 56.0 grains of IMR 4350 powder gives the 165 grain Sierra bullets a MV of 2900 fps.
What is the sectional density of a 150 grain bullet?
The sectional density (SD) of these three bullet weights is as follows: 150 grain .226, 165 grain .248, and 180 grain .271. Using Nosler Partition spitzer bullets for comparison, the ballistic coefficient (BC) of these bullets is: 150 grain .387, 165 grain ..410, and 180 grain ..474.