Is 160 a vibration level?
The purpose of DO-160 vibration testing, which involves a series of tests, is to demonstrate that airborne equipment complies with performance standards and durability requirements when subjected to installation-specific vibration levels.
Does 160 inrush current test?
The RTCA DO-160 power inputs test defines the test conditions and procedures for ac and dc electrical power applied to the terminals of equipment to be tested. RTCA-DO-160 power testing covers the following electrical power supplies: 14 V dc, 28 V dc and 270 V dc.
Does 160G Do section 13?
The DO-160G Section 13 test standard specifies one category of equipment. Equipment Category F: Equipment that is installed where it will be exposed to severe fungus contamination. This equipment needs to be subjected to the DO-160 fungus resistance test.
Does 160 rapid decompression?
The DO-160 specification was designed to test sudden pressure changes starting from 8,000 feet to 60,000 feet (536 to 55 Torr) in 15 seconds. An altitude of 8,000 feet (536 Torr) was used for the initial cabin altitude and 60,000 feet was used for the final cabin altitude after decompression.
Does 160 voltage spike?
The RTCA DO-160 voltage spike test determines whether equipment can withstand the effects of voltage spikes. These spikes arrive at the equipment on its power leads. This can occur via either ac or dc power. The adverse effects voltage spikes can have on equipment are numerous and range in degree of severity.
Do 160G Environmental Conditions and Test Procedures for Airborne Equipment?
DO-160, Environmental Conditions and Test Procedures for Airborne Equipment, published by RTCA (Radio Technical Commission for Aeronautics), is the international standard that defines environmental test conditions and applicable test procedures and criteria for avionic equipment to determine their performance …
What does do stand for in do 160?
DOcument
From Wikipedia: The designation DO stands for “DOcument”.
Is 160G compliant?
DO-160, Environmental Conditions and Test Procedures for Airborne Equipment is a standard for the environmental testing of avionics hardware. It is published by the Radio Technical Commission for Aeronautics (RTCA) and supersedes DO-138.
Does 160 sand and dust?
The RTCA DO-160 sand and dust test standard determines the resistance of the equipment to the effects of blowing sand and dust. The test involves the sand and dust being carried by air movement at moderate speeds. Sand and dust test labs investigate the effect these contaminants can have.
Does 160g Do section 24?
The RTCA DO-160 Section 24 icing test determines the performance of equipment under certain conditions. The icing testing applies to equipment that is exposed to icing conditions. These icing conditions are typically encountered in situations of rapid change.
Does 160 salt fog test?
The RTCA DO-160 salt fog test standard determines the effects of ocean conditions. These conditions are a salt atmosphere that can be extremely corrosive. Products placed in service on a plane operated near or over a salt water body of water are susceptible.
Do-160G Environmental Conditions and Test Procedures for Airborne Equipment?
Does 160 salt fog?
Does 160 Test Plan Generator?
The DO160 test plan generator software produces automatically the documents needed for testing according to DO160 standard. You will be able to produce automatically test plan, test report, documents in hours rather than weeks. Hundreds of DO160 experts are already using this software for their documentation!
What is the do 160 test for fungi?
RTCA DO-160 – Section 13.0 – Fungus Resistance. These tests determine whether equipment material is adversely affected by fungi under conditions favorable for their development, namely, high humidity, warm atmosphere and presence of inorganic salts.
What is the purpose of the fungi test?
These tests determine whether equipment material is adversely affected by fungi under conditions favorable for their development, namely, high humidity, warm atmosphere and presence of inorganic salts.
What does dodo-160 testing involve?
DO-160 testing involves a wide range of factors, from humidity and temperature to electrical interference and shock resistance. The standard is intended to cover almost anything that can disrupt the performance of an airborne electrical or electronic device.
What is DO-160 and why does it matter?
To standardize the production and testing of these sensitive components, the Radio Technical Commission for Aeronautics (RTCA) publishes DO-160, Environmental Conditions and Test Procedures for Airborne Equipment — a set of best practices which has been adopted by all major aerospace and avionics manufacturers.