Is there a reset button on a Maytag washer?
Press and hold the Start/Pause button for 3 seconds. All indicator lights should be off at this point. Reset the Washer: To reset (clear) the washer, rotate the Cycle Selector Knob counter-clockwise (left) to clear any sequence.
How do I reset my Maytag washer board?
The easiest way to reset a Maytag washer is to disconnect the power to the washing machine for three minutes. Disconnecting the power allows the electrical charge to dissipate from the washing machine, which allows it to reset. If the reset fails, unplug the washer again, this time leaving it unplugged for ten minutes.
How do you fix a Maytag washer that won’t start?
This is how to properly reset a Maytag washer:
- Step 1: Unplug the machine.
- Step 2: Press and hold the POWER/START button for 5 seconds.
- Step 3: Hold down the PLAY/PAUSE button for 5 seconds.
- Step 4: Plug the machine back in and press POWER to restart.
Where is fuse on Maytag washer?
Maytag washers have a fuse in the lid-switch assembly. Maytag top-loading washers have a fuse in the lid-switch assembly. When you close the lid after adding the laundry and soap, the lid’s plastic switch contacts with the assembly underneath.
What are the error codes on a Maytag washer?
Error Codes in my Maytag Front Load Washer
| Error Code | Error |
|---|---|
| Sud or Sd | There are too many suds in the washing machine. |
| F5 E2 | The door is not locking properly. |
| F7 E1 | Indicates a motor speed sensing error, |
| F8 E1 or LO FL | The washer is sensing a low flow of water. |
How do I troubleshoot a Maytag washer that won’t drain?
Check your Owner’s Manual for model-specific cleaning instructions or use Maytag Product Help if you have a Maytag ® washer. If cleaning the drain pump filter doesn’t fix the problem, read on for additional troubleshooting steps. Always consult your appliance’s Owner’s Manual or Installation Instructions before attempting any repairs.
What are some common Maytag front-load washer problems?
Some common Maytag front-load washer problems include not agitating or spinning, and not draining or filling with water.
Can I use Maytag washing machine cleaner tablets?
Maytag recommends affresh® washing machine cleaner tablets 1 , but you can use common household items as well. Learn how to clean your washer in four simple steps. Loads left too long in the washer can cause odors.
Why is my Maytag washer vibrating?
Perhaps your washing machine is vibrating during spin cycles or making noises during wash cycles. Don’t stand for this kind of appliance misbehavior. Do something about it. Look, Maytag is a great brand, but if the washer isn’t working that doesn’t work for anybody.
Power/cancel reset Another method for resetting your Maytag washer is to press the Pause/Cancel button, then select the appropriate cycle, and then press the Start/Pause button. This method works best when trying to move the washer onto the next cycle or when trying to clear an error code.
Why will my Maytag washer not start?
If your Maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. Test the outlet with another three-prong appliance. If the outlet is working, plug the power cord securely into the outlet. Do not use an extension cord or adapter.
Why is my Maytag washer stuck on sensing?
Is the lid closed fully (and locked)? Another thing we recommend you take a look at is the lid (you want it to be closed fully and also locked). That’s because the washer tends to remain in sensing mode (without going on to actually start washing the clothes) if the lid is not closing and locking as it is supposed to.
How do I reset my Maytag washer to factory settings?
How to reset Maytag top load washer to factory settings – alternative method
- While the washer is off (but plugged in), rotate the cycle selection knob counter-clockwise (left) from the current position to the 12 o’clock (top position).
- Then, rotate the cycle selection knob right(clockwise) and wait about 1/2 second.
Why did my Maytag washer stop working?
Common solutions for: Maytag Washer stops mid cycle If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.
Where is the fuse located on a Maytag washer?
What to do if my washer is stuck on sensing?
Reset the washer First, try to cut off power to the machine for a few minutes (about 3-5 minutes) then reconnect it to power and see if it will behave. Quick Tip: Every so often, leaving the washer unplugged for longer (you can even leave it unplugged for 15-20 minutes) does the magic.