What is a Nikon Total Station?
The Nikon K Series Total Station is a powerful yet light Mechanical Total Station that makes Surveying and Construction measurement jobs accurate, quick, and convenient.
What is total station PDF?
Definition. Total station or TST (total station theodolite) is an electronic/optical instrument used in modern surveying and building construction. The total station is an electronic theodolite (transit) integrated with an electronic distance meter (EDM) to read slope distances from the instrument to a particular point …
What is the accuracy of total station?
A typical total station can measure distances up to 1,500 meters (4,900 ft) with an accuracy of about 1.5 millimeters (0.059 in) ± 2 parts per million. Reflectorless total stations can measure distances to any object that is reasonably light in color, up to a few hundred meters.
How do you zero a total station?
Turn the total station to zero degrees on the horizontal axis. Position a reflection in the line of sight of the device. Using the EDM functionality, move the reflector until it is the correct distance away from the instrument. This is the point of the coordinates entered into the system.
Which is the best total station?
Check Out the best Total Stations
- Leica iCON CC80 Tablet Computer.
- Leica iCON iCT30 Construction Layout Tool.
- ICON iCR80 Robotic Construction Total Station.
- Leica Geosystems iCON iCB70 Manual Construction Total Station.
- ICON iCR70 Construction Robotic Total Station.
- Leica iCON iCB50 Manual Construction Total Station.
How do you fix coordinates on a total station?
1) Once oriented select the OBSERVATION option. 2) Place a prism on the unknown point keeping the staff of the prism as vertically erect as possible. 3) Check the height of Prism/Reflector and enter the value in total station (HR or R.HT) 4) Target the prism and press the MEAS (measure) function key.
Can you use a total station in the rain?
Be mindful of the conditions you’re working in. “The equipment can be used in the rain, but don’t dunk it in water,” Crozier says. “And even in the rain, you can get a rain shield to go over the instrument in those conditions where it might be a little too much.
How accurate are total stations?
What is the difference between total station and GPS?
Here’s our comparisong between GPS rover and total station. The main difference in total station and the GNSS rover is that the total station depends on your input for its location and orientation while the GNSS rover has a location and orientation from a series of satellite constellations.
Is there an instruction manual for the Nikon N series total station?
Introduction For your safety, read this instruction manual carefully and thoroughly before using the Nikon N Series/K Series Total Station. Although Nikon products are designed for maximum safety, using them incorrectly or disregarding the instructions can cause personal injury or property damage.
Is the Nikon XS series total station safe to use?
For your safety, read this instruction manual carefully and thoroughly before using the Nikon XS Series Total Station. Although Nikon products are designed for maximum safety, using them incorrectly or disregarding the instructions can cause personal injury or property damage.
How do I set up my Nikon XS series total station?
Nikon XS Series Total Station Instruction Manual 35 Getting Started 3 LCD backlight, Laser pointer, Beep sound and Contrast adjustment To turn on/off the 1. LCD backlight, 2. laser pointer or 3. beep sound, and to do the 4. contrast adjustment, press the illuminatio n key and open the switch set up window shown above.
Where can I find the instruction manual for a Nikon surveyor?
N Series/K Series Total Station Instruction Manual Contact Information Nikon Surveying Instruments 10368 Westmoor Drive, Suite #100 Westminster, CO 80021 USA Phone: +1-720-587-4700 888-477-7516 (Toll Free in U.S.) Legal Notices Copyright and Trademarks