Should I record electric piano in mono or stereo?
stereo
However, as I mentioned earlier, the best way to record your digital piano is in stereo, which means you’ll need to connect both line out jacks (right and left channel) to your recording device.
Where should piano be panned in a mix?
For a stereo recording of the piano, pan the two tracks left and right. If recorded in mono try panning just off centre.
Should piano be panned?
If your piano is just creating a wash of sound in the mix by being panned left and right, help yourself out by simply panning one side to match the other and go mono. It will put the piano in a defined place in the mix, thus making it more audible and simultaneously carving out room for the rest of the band.
Should I record piano in mono?
Recording in mono is definitely the easiest choice, but the sound can be narrow and a bit flat – it won’t reflect the real way that we hear the instrument (in stereo), with the lower frequencies panned to one side and the higher frequencies panned to the other side.
What is stereo miking?
Unlike a single mono microphone, stereo miking gives the listener sound images that correspond to the location of instruments in the recording session. Sounds that were on the left side of the stage are heard predominantly through the left speaker.
How do you mic a piano with one microphone?
Single Microphone Recording You can capture the piano’s full sound with a single mic; place an AT2020 cardioid condenser mic just outside the instrument. As mentioned earlier, you can find the sweet spot by walking the room while the pianist plays. To prevent an overly roomy sound, position the mic closer to the piano.
Should a stereo have a piano?
Normally, though, when piano is a part of larger instrumentation, I tend to still have it stereo but with rather narrow stereo field. For example in classical concert you would normally hear the piano from the “treble” side of the instrument.
Should you pan in mono?
A mono track can be panned anywhere in the mix – hard left, hard right, and anywhere in between. In fact, panning a mono track, can sometimes create a much more defined and focused picture of the sound you are panning – rather than trying to pan a stereo file (more on that below).
Where should pianos be panned?
low/left and high/right. With a rok band, guit (on the left), bass, drums and piano, and depending on the song, I will place the high at 2:30 or 3 and the bass at 5 or 6. The pan points will change with each song but unless the piano is featured, I usually put it opposite the guitar.
Are songs recorded in mono or stereo?
If you are recording the vocals of one singer in a booth, then you should record in mono. However, if you are recording vocals of multiple singers and instruments, you should record in stereo. The terms mono and stereo are quite common in the sound recording industry.
What is XY stereo miking?
XY stereo recording uses a coincident pair of directional- or bidirectional, angled microphones. Hence, the directional information is obtained solely from the level difference between signals. In practice, “coincident” means that the microphone capsules must be placed close and normally slightly above each other (fig.
Can a single mic record piano?
Yes, you really can get away with using just one mic. A decent condenser on a stand placed near the side of the grand piano and under the lid will capture a good sound. The best way to find the best position is to use your ears.
What mic is best for recording piano?
Best Microphones for Piano Recording – In-Depth Review
- AKG C414.
- Behringer C-2.
- Neumann TLM 107.
- Sennheiser MKH 8020.
- Shure SM7B.
- MXL 770.
- Audio-Technica AT2020.
- LyxPro SDPC-2.