How do I charge my Plantronics Explorer 500?

To charge your Explorer 500/505:

Table of Contents

Plug the USB end of the charge cable into a PC or an AC adapter.
Plug the micro USB end of the cable into your headset.

How do I reset my Plantronics Explorer 500?

How to Reset a Plantronics Bluetooth

Turn on the headset by pressing the “Power/Answer” call button.
Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
Wait for one minute for the reset to be complete.
Turn on the headset again by pressing the “Power” button.

How do I setup my Plantronics Explorer 505?

With the headset turned on, press and hold the call control button until you see the headset indicator light flash an alternating red and blue. Activate Bluetooth® on your phone and set it to search for new devices. Select “PLT_E500″. If necessary, enter four zeros (0000) for the passcode or accept the connection.

How do you charge a Plantronics Bluetooth?

How to Charge a Plantronics Bluetooth Charger

Plug the small end of your Plantronics charger into the charging port on your Bluetooth headset.
Insert the AC adapter into a wall outlet. You should see a light on the Bluetooth headset.
Allow the headset to charge for at least 2 hours.

How do you charge a Plantronics Bluetooth earpiece?

Charging Your Headphones or Bluetooth Adaptor

Plug the AC charger into a power outlet.
Connect the charger cable to the headphones or Bluetooth adaptor.
Charge each for at least 1 hour before first time use, or 3 hours to fully charge. The LED indicator glows red while charging.

How do I know if my Plantronics headset is fully charged?

To charge these headsets, simply slide them into the charging base and be sure that the amber light (on the left side of the base) begins flashing. When the amber light becomes solid, the headset is fully charged.

How do I check the battery level on my Plantronics headset?

You will hear the available talk time when you turn on the headset, as well as at the end of each call. Check the Battery Level in Between Calls: Tap the Voice Recognition button. After the “Say a command” voice prompt, say, “Check battery.”