Is Sterling 10.5 full-float?
The 10 1/2-inch (commonly referred to as the “Sterling 10 1/2”) is a full-float axle with disc brakes found in 1999-2010 Ford Super Duty F-250 and Super Duty F-350 trucks. It weighs in at approximately 333 pounds in single rear-wheel versions. The ring gear diameter and pinion shaft length are both 10 1/2 inches.
How do I measure axle size?
TRACK LENGTH: measure your axle track length by determining the distance between the center of one tire to the center of the other tire. A more precise measurement can be made by measuring the distance from one ‘HUB FACE’ to the other.
How do I know my axle size?
Hook your tape measure on the outside of the hub where your rim touches your hub. Measure across your axle to the exact same spot on the other side. Do not measure to the back side of your hub.
What axle is in F350?
A Ford Sterling 10.25 axle is a heavy duty, full floating rear axle produced for F-250 and F-350 trucks. It can handle up to 5,000 pounds of gross vehicle weight. In the beginning, Ford used Dana axles in their trucks. Later on, they developed the Sterling 10.25 axle to replace the Dana axles.
What is 12mm thru axle?
Example of how to measure Thru Axle specifications. From this specification we know 142mm is the hub width (or frame spacing) and 12mm is the diameter of the axle. We need to specify the following items to get the proper replacement Thru Axle. Total Thru Axle length from the seat to the end of the threads.
What is axle diameter?
There is also often a sticker or a tag on your trailer axle that tells you the weight capacity of your axle which can also help determine size. Some common axle sizes are: Round, 1-3/4 inch diameter = 2,000-lb axle. Round, 2-3/8 inch diameter = 3,500-lb or 4,400-lb axle. Round, 3 inch diameter = 5,200-lb to 7,000-lb …
How do you measure the diameter of a hub?
Measure across the middle of the wheel hub to get the diameter. The wheel hub bolt pattern is the number of bolts lugs on the hub and the diameter of the circle in which they are arranged.