What is a 6013 welding rod good for?
6013 Welding Rods The 6013 electrode is best used for light to medium penetration on thin or sheet metal pieces. 6013 electrodes are commonly used in manufacturing truck frame bodies, metal furniture, storage tanks, farm implementations, or where aesthetics are of grave importance.
What amps should I run 6013?
6013 Tensile strength is 60,000 PSI Amperage 40-80 Amps AC, DCEN, DCEP (Either Polarity).
What is 6013 electrode?
6013 is a high titanic coated electrode. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel.
What does E6013 mean in welding?
Thus the number E6013 written on an electrode indicates that it is a rutile potassium based flux coated mild steel electrode with 62,000 psi minimum tensile strength having light penetration which can be used in all positions of welding except vertically down.
Is 6013 or 6011 better?
6013 Electrodes. The E6011 and E6013 are comparable in tensile strength, welding positions, and current types. E6011 is more of a heavy-duty industrial rod better suited for deep joints. E6013 has a delicate arc that is better for clean sheet metal welds.
Is a 6013 Rod AC or DC?
As a result, 6013 is an all-purpose electrode that provides a soft, steady arc that is easily regenerated, easy slag control for vertical-down welding, low spatter and a beautiful bead appearance. 6013 electrodes may be used in any position with AC or DC (straight or reverse polarity).
Are all E6013 electrodes the same?
E6013 (CSA E4313) electrodes are similar to rod-type E6012 (CSA E4312) electrodes but E6013 is having distinct differences in the coating, slag formation & welding polarity.
What is the polarity of 7016?
welding parameters of 7016 welding rod
| Diameter (inch) | Polarity | Volts Range |
|---|---|---|
| 3/32 | DCEP, DCEN | 23-27 |
| 1/8 | DCEP, DCEN | 23-27 |
| 5/32 | DCEP, DCEN | 24-30 |
Is 6013 electrode positive or negative?
Electrode Polarity Chart
| ELECTRODE | DC* | PENETRATION |
|---|---|---|
| 6011 | EP | DEEP |
| 6013 | EP, EN | LOW |
| 7014 | EP, EN | MED. |
| 7018 | EP | LOW |
What polarity do you weld 6013 with?
6013 electrodes may be used in any position with AC or DC (straight or reverse polarity).
Does 6013 need to be in an oven?
Humidity below 50% should be avoided for 6010, 6011, 6012 and 6013 electrodes. At no time should these classes of electrodes be stored in an oven above 130°F.
What polarity do you use for 6013?
What is the best welding rod to use on cast iron?
Nickel alloy electrodes
Nickel alloy electrodes are the most popular for cast iron welding.