Can I install a dimmer on a 3-way switch?
Dimmer switches can be installed on a three-way switch. This allows two controls to turn the light on and off, with a third switch left for the dimming function. Three-way switches can be used with single-pole applications when installing a dimmer switch.
Can a 3-way switch have a dimmer on both ends?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only. In this setup, the light level is controlled from a single location, whichever light switch you replace with the dimmer switch.
Can you have 2 dimmers on a 3-way switch?
When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only.
Can I use a 4 way switch as a 3-way?
A 4way switch will not work in place of a 3way. The common toggle (in), whether up or down on a 3way switch, comes in contact with both switch leg (out) terminals. A 4way switch will not accomplish this. The 4way is more like two “separate” single gang switches, they will not work in unison as one.
What does single pole mean on a dimmer switch?
With a standard single-pole dimmer, a single switch controls the light. With a three-way dimmer, you can control a light with two switches. You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another.
Can you have 2 dimmers on the same circuit?
You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.
Can you put 2 dimmers on a 3 way switch?
Do I need two 3 way dimmers?
You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.
Does it matter which wire goes where on a dimmer switch?
Unless the new dimmer is specifically marked with LINE and LOAD or similar, it doesn’t matter which wire goes to which screw/pigtail in a simple two wire switch or dimmer. Since your new switch can be used as a three way, the instructions should say which screw should not be used.