Should I use pre fader metering?
You can also set the level meters to show you the signal level before the channel strip volume fader, called pre-fader metering. You may want to use pre-fader metering when you want to adjust a signal using the controls on your audio hardware before recording.
What is the difference between pre fader and post fader?
An easy way to understand them is to imagine your signal flow in a linear format and where the channel fader lies. A pre fader send simply routes a copy of your track before the channel fader, whereas a post fader send will do this after your channel fader.
What are post fader effects?
This means that when the channel fader is down, no signal is sent out the Aux Send(s) on that channel. Post-fader Aux Sends are generally used as “effects sends,” to send a signal out from a particular channel to an effects processor (see WFTD Effects Loop).
What is post fader used for?
Post-fader Aux Sends are generally used as “effects sends,” to send a signal out from a particular channel to an effects processor (see WFTD Effects Loop).
What is pre fader level?
In pre fader mode, your meters show the signal level after the inserts. It is not affected by the fader level. Therefore, the fader could be at negative infinity dBFS but the channel will still show the signal after the last insert. In post fader metering, you meter is affected by your fader level as well.
What does pre mean in Pro Tools?
Post means after and pre means before… So Post fader means that a send is sent after the channel fader.. while pre fader means the send is sent before the channel fader — each have separate uses.
What does pre fader do?
A pre aux send delivers the signal out of the mixer BEFORE it passes through the channel fader; pre-fader. Therefore, you can move the volume fader all you want but it’s not going to affect the volume going to that auxiliary unit.
What does post fader mean?
(See WFTD archives Pre Fade/Post Fade) A post fader Aux Send taps the incoming signal from the channel at a point after the channel fader. This means that when the channel fader is down, no signal is sent out the Aux Send(s) on that channel.
What is Post fader Metering?
This mode is normally used when recording, so the engineer can “see” at the meter, the level of the signal recorded. Post-Fader Metering: The meter on the channel strip will show the level after the fader. Therefore, the position of the fader will affect the lecture of the meter.
Should effects be pre or post fader?
But even then, sending post-fader is often advisable. Pre-fader sends are more typically used for Headphones sends, or a special effect. If you have a vocal sending to a reverb pre fader, every time you adjust the vocal’s volume you are changing the relationship between the vox and verb.
What is pre-fader level?
A pre-fader Aux Send taps the incoming signal from the channel at a point that is before the channel fader. So, when the channel fader is down, the signal is still being sent to the aux bus.
What is pre-fader used for?