Menu Close

How do I write a PSpice program?

Admin

How do I write a PSpice program?

Execute PSPICE using the circuit file created as the input.

  1. PSpice Netlist (Circuit) File Format:
  2. Vxxx N1 N2 DC [VALUE]
  3. Vxxx N1 N2 AC [VALUE]
  4. Vxxx N1 N2 SIN(VO VA [Freq[Td[Df[Phase]]]])
  5. Vxxx N1 N2 EXP (V1 V2 [Td1[Td2[Tau2]]])
  6. Vxxx N1 N2 PWL (T1 V1 {Tu Vu]…)
  7. Vxxx N1 N2 PULSE (V1 V2 [Td[Tr[Tf[PW[Period]]]]])

How do you make a subcircuit in PSpice?

The name of the subcircuit is created from the schematic name….

  1. Choose Tools – Create Netlist.
  2. Click on the PSpice tab.
  3. Check the Create Subcircuit Format Netlist check box.
  4. Change the path of the library file to your training directory so that you can find it later.
  5. Click OK.

How do I get VCC in PSpice?

Select Place > Power and scroll down to the VCC_CIRCLE symbol and in the Name: box, change the name to VCC and click on OK.

What are the different types of analysis in PSpice?

PSpice is a general-purpose circuit simulator capable of performing four main types of analysis: Bias Point, DC Sweep, AC Sweep/Noise, and Time Domain (transient). DC Sweep The DC Sweep analysis varies a voltage source over a range of voltages in an assigned number of increments in a linear or logarithmic fashion.

What is Tran in PSpice?

TRAN(TRANSIENT ANALYSIS) : Purpose : The . TRAN command causes a transient analysis to be performed on the circuit and specifies the time period for the analysis.

How do you make a subcircuit?

To add a subcircuit element to a schematic or system diagram:

  1. Click Subcircuits in the Elements Browser. The available subcircuits display in the lower window pane.
  2. To place the desired subcircuit, click and drag it into the schematic or system diagram, release the mouse button, position it, and click to place it.

How do you simulate a netlist?

Netlist Simulation Procedure when starting from Virtuoso (layout netlist):

  1. Choose Setup->Simulator/Directory/Host.
  2. Choose Setup->Model Path.
  3. Choose Analysis -> Choose.
  4. Example: Transient analysis, choose ‘tran’ and then type in the total time you wish to run (ex.

What is Vampl in Orcad?

For VSIN power supply, VAMPL is the parameter that represents “peak” amplitude of voltage. This has been mentioned in PSpice reference guide for ISIN (Current counetrpart of VSIN).

What is DC sweep analysis in PSpice?

DC sweep analysis in PSpice allows you to sweep a source, voltage, or current, a global parameter, a model parameter, or the temperature through a range of values. For the example circuit, let’s very drain-to-source voltage, VDS, from 0 to 10 volts with an increment of 100 millivolts.

How do you do transient analysis in PSpice?

Select PSPICE → New Simulation Profile. Name the profile “transient”. Select Time Domain (transient) for the Analysis type. There are several other important settings for the transient analysis.

What is Tran in LTspice?

TRAN — Perform a Nonlinear Transient Analysis. Perform a transient analysis. This is the most direct simulation of a circuit. It basically computes what happens when the circuit is powered up. Test signals are often applied as independent sources.

What is a subcircuit?

(ˈsʌbˌsɜːkɪt ) a circuit within another circuit.

How do you use subcircuit in LTspice?

How to add a subcircuit model to LTspice (SwitcherCad)

  1. Look under C:\Program Files\LTC\SwCADIII. (or C:\Program Files\LTC\LTspiceIV)
  2. Put the file 1N5338B.
  3. Go to the directory lib\sym.
  4. Find a component similar to what you want.
  5. Copy zener.
  6. Open 1N5338B.asy in a text editor, and make the following changes:

What is a PSpice netlist?

First of all PSpice needs to be able to understand your circuit by using a ‘netlist’ which is composed of a list of circuit symbols to represent the various circuit elements existent in the actual circuit (e.g. a resistor would be denoted by R1 and the voltage across it is V(R1) and its current I(R1)) In the first …

How do you run netlist in PSpice?

Running a Simulation From A Circuit File

  1. Open PSpice or PSpice A/D.
  2. Click File – Open Simulation.
  3. In the resulting dialog, set the Files of Type dialog to Circuit.
  4. Navigate to the directory in which the circuit file is stored and select it and click Open.
  5. Run the simulation.