Menu Close

How can I make my car a Bluetooth control?

Admin

How can I make my car a Bluetooth control?

  1. Step 1: Materials Required.
  2. Step 2: Solder All Motors & Attach Them to the Base.
  3. Step 3: Join Wheels to All the Motors.
  4. Step 4: Join the Two Batteries in Series.
  5. Step 5: Connect Motors to Motor Drive.
  6. Step 6: Connect Motor Drive to Arduino.
  7. Step 7: Join Bluetooth Module to Arduino.
  8. Step 8: Connect Motor Drive to Battery.

What is Bluetooth controlled car?

Bluetooth controlled car is a robot which is built using Atmega8 Microcontroller in which serial communication is done via Bluetooth and • Android Application and programming is done in embedded C language.

What is Bluetooth module Arduino?

The Bluetooth module is a small range wireless communication device that can be used for various purposes like sending of data or controlling of devices connected with it. Furthermore, it can be interfaced with Arduino Uno and can be used in multiple projects where wireless communication is required for a small range.

What are the advantages of Bluetooth controlled car?

The project is Bluetooth based because it gives us wider range of control and more efficiency. It also gives us the advantage of changing the remote anytime, meaning that we can use any android devices including phones, tablets, computers. Physical barriers like walls, doors, etc. do not effect in controlling the car.

How do DC motors control Bluetooth?

To enable the motor, connect “Enable 1, 2” (pin1) and “Vcc1” (pin 16) to +5V. Connect “Vcc2” (pin 8) to the positive of the 12V battery pack. Connect pins 4, 5, 12 and 13 to GND. Connect “Input 1” (pin 2) to pin 10 of the Arduino, which will transmit the pwm2 signal, and “Input 2” (pin 7) to pin 9, for pwm1 .

What are 5 Advantages of Bluetooth technology?

For those of you still fumbling around with just a handset, below is an introductory list of benefits you may be missing out on:

  • Wireless.
  • Affordable.
  • Easy Automation.
  • The Wireless Standard.
  • Minimal Interference.
  • Energy-efficient.
  • Sharing of Data and Voice Communications.
  • Your own Personal Area Network.

How can I make my own Arduino Bluetooth controlled robot at home?

Step 1: Parts

  1. HC-05 Bluetooth Module.
  2. Arduino Uno with a USB A to B cable.
  3. Computer with Arduino IDE for programming.
  4. Some jumper wires.
  5. 2 geared motors.
  6. Some sort of battery holder and batteries, I’m using an 18650 one which holds 2, 3.7 volt 18650’s, providing around 7.4 volts.
  7. TB6612FNG Motor Driver.