What is XBee USB adapter?
XBee USB Adapter is a UART communication board which supports XBee connectivity. Features UART interface, USB interface, and onboard buttons/LEDs, provides an easy way for developing/debugging. Test XBee modules : onboard buttons/LEDs for easy testing.
What is XCTU software?
XCTU is a free multi-platform application designed to enable developers to interact with Digi RF modules through a simple-to-use graphical interface. It includes new tools that make it easy to set-up, configure and test XBee® RF modules.
How does an XBee work?
XBee devices transmit data coming from the serial input over the air, and they send anything received wirelessly to the serial output. Whether for communication purposes or simply for configuring the device, a combination of both processes makes XBee communication possible.
How do I download XCTU software?
Download and install XCTU – Windows
- Go to www.digi.com/xctu.
- Click Download.
- Under Download XCTU, click the Windows installer link.
- Once the download is complete, run the executable file and follow the steps in the XCTU Setup Wizard.
What is the XBee USB adapter for?
The new version of Xbee USB adapter is also welded with the female pin for FTDI so that users can directly use the adapter as a FTDI program writer, such as Arduino FIO/pro/mini、lilypad Arduino and so on. It’s a must-have for interactive electronic installations and projects.
How to connect XBee to Arduino?
Connect the Arduino to the xbee as shown in the sketch. please note that Tx of Arduino has to be connected to Tx of Xbee and Rx of Arduino to Rx of Xbee Make sure to connect the 3.3v of the Arduino to Xbee’s vcc and not the 5v as you might damage the xbee.
How to check if XBee is attached to the device?
Once the connections are made open the Xctu software and use the test to detect the Xbee attached. If “All is well” then you should see the device is of the xbee attached if not don’t worry change your baud rate to 115200 and check. If this also doesn’t work please do leave your comment I will try my best to help you out /\\.
What is XBee shield and how does it work?
It is a mesh communication protocol that sits on top of the IEEE 802.15.4 ZigBee standard. XBee supports peer-to-peer as well as point-to-multipoint network communications wirelessly with a speed of 250 kbit/s. To use your XBee Shield with an Arduino, you’ll need to solder in some stackable headers.