How much horsepower does a RM125?
Engine
| 1975 Suzuki RM 125 | |
|---|---|
| Displacement | 123 cm³ / 7.5 in³ |
| Horsepower | 23 – 26 hp (17 – 19 kW) @ 10,500 RPM |
| Maximum Torque | 16.7 Nm (1.7 kgf-m, 12.3 ft-lb) @ 9,500 RPM – RM125M; 17.5 Nm (1.79 kgf-m, 12.9 ft-lb) @ 8,500 RPM – RM125 S |
| Top Speed | 65 mph (105 km/h) |
What does RM mean in Suzuki?
Just like its larger RM-Z cousins, the RM100 delivers class-leading handling for both experienced racers and rookie riders alike. The letters “RM” stand for “Racing Model” and the motorcycles produced with this prefix in their model names are suited to use in motocross racing.
How tall is a 125 Suzuki?
Overall Height1110 mm (43.7 in.) Wheelbase1270 mm (50.0 in.) Ground Clearance290 mm (11.4 in.) Seat Height805 mm (32.0 in.)
What happened to the ATAC on the 1985 Honda cr125r?
Top end was sorely lacking and many tuners took to eliminating the ATAC altogether in search of more power. The 1985 CR125R motor maintained the ATAC system of ’84, but paired it with an all-new top and bottom end. In 1984 there had been problems with pistons breaking, so for ’85 Honda added a bridge to the exhaust port to prevent ring-snagging.
What is the difference between a 1984 and 1985 Honda cr125r?
The 1985 CR125R motor maintained the ATAC system of ’84, but paired it with an all-new top and bottom end. In 1984 there had been problems with pistons breaking, so for ’85 Honda added a bridge to the exhaust port to prevent ring-snagging. Displacement was also up slightly, with a longer stroke and slightly smaller bore than ‘84.
What happened to the Honda CR125m Elsinore?
While the CR125M Elsinore had turned the industry on its head in 1974, its subsequent follow-ups had failed to impress. The all-new YZ125 and RM125 quickly eclipsed the Elsinore’s performance and left the outdated Honda in their wake. In 1985, Ron Lechien was Big Red’s hired gun in the 125 class.
What is the bore and stroke of a Harley Davidson Model 85?
Both the bore and stroke were new, with a 3.3mm longer stroke and a 1.5mm smaller bore for ’85. This resulted in a perfectly square 54mm x 54mm bore and stroke on the new mill.