How do I setup my D-Link router DIR-825?

Configuration for D-Link DIR-825

Table of Contents

Visit the router’s IP address (http://192.168.0.1) in a new browser window.
Enter the router password.
Click on the Manual Internet Connection Setup button at the bottom.
Enter the OpenDNS addresses in Primary DNS Server and Secondary DNS Server fields.

Is Dlink DIR-825 A good router?

Its performance is merely acceptable and its range is poor compared with other Wireless-N routers, including other D-Link units, but we nonetheless recommend the DIR-825 for its stability, SharePort feature, ease of use, and the fact that you can get it for about $140–a very good deal for a true dual-band router.

How do I use my D-Link 825 as a repeater?

To use your DIR-825 as a repeater, the software version will need to 1.02 or 3.01-3.06. Firmware version 7.00 is not supported.
After the router has rebooted, you will need to disconnect the cable and reconnect after 5 seconds.

How many devices can connect to DIR-825?

A: The traditional 2.4 GHz wireless works at 300 mbps. The new 5Ghz wireless network works at 750 mbps. Q: How many devices can be connected? A: Nearly 10 to 15 devices can be connected at once to this router.

How do I reset my D-Link DIR-825 to factory settings?

How to reset a router to factory defaults

Step 1: Find the reset button. There should be a tiny reset button.
Step 2: Push the reset button. While the router is on, push and hold the reset button.
Step 3: Hold the reset button.
Step 4: Reboot the router.
Step 5: Log in to the router.

Does Dlink DIR-825 have MU-MIMO?

D-Link DIR-825 MU-MIMO Gigabit Wireless Router, Dual Band, 1200 Mbps Wi-Fi Speed, 5 Gigabit Port, 4 External Antenna, Router | Access Point |Repeater Mode, Black.

Is DIR-825 MU-MIMO?

The DIR-825 AC1200 MU-MIMO Wi-Fi Gigabit Router features dual-band wireless, allowing you to operate two concurrent, high-speed Wi-Fi bands for ultimate wireless performance. Surf the web or make important Internet phone calls on the 2.4 GHz band, while simultaneously streaming digital media on the 5 GHz band.

How do I use my D Link router as a wired repeater?

Step 1: Open your Internet browser and enter http://dlinkrouter, http://dlinkrouter.local, or http://192.168.0.1 into the address bar. Step 2: The default username is Admin. Enter your administrator password. If you have not changed the default password, this field should be left blank.

Is DIR 825 MU MIMO?

How do I change my D-Link DIR 825 WiFi password?

How do I change my D-Link Router’s password?

Step 1: Open your Internet browser and enter.
Step 2: Enter the password for your Admin account in the field provided.
Step 3: Locate the Wireless Settings from the drop down menus.
Step 4: In the Password field, specify the new wireless password for the desired wireless band.

What is the username and password for Dlink 825?

The default username for your Dlink DIR-825 is admin. The default password is (blank). Enter the username & password, hit “Enter” and now you should see the control panel of your router.

How do I reset my Dlink DIR 825 to factory settings?

What is the default password for Dlink DIR-825?

How do I reset my Dlink DIR-825 router password?

And no need to get your breathing rates high in case you have changed the username / password of Dlink DIR-825 and forgot them, as you can just reset the Dlink DIR-825 router by press-and-hold the reset button with a clip for about 15 seconds.

What is the best gigabit router?

The 4 best gigabit routers

Best overall: TP-Link Archer AX11000.
Best for VPNs: TP-Link Archer AX90.
Best for gamers: NETGEAR Nighthawk RAX200.
Best for budgets: TP-Link Archer AX20.