What nails are best for cedar shingles?
The ideal nail types for cedar shingle roofing projects include corrosion-resistant varieties like stainless steel and hot-dipped galvanized. At Cedar Roof Coatings, we advise against the use of plain steel nails to keep the cedar roofing stain-free over time.
How long does it take to tear off shingles?
It can take as little as ONE day to tear off and replace an asphalt shingle roof. If it is a clear, hot, summer day, then a roofing crew of 5-6 can tear off and replace a 40 square asphalt shingle roof in a single day (a square is roofing terminology for shingles.
What wind speed are shingles rated for?
Most modern shingle roofs are rated to withstand 90 mile-per-hour winds, although there are roofing products available for hurricane and tornado-prone areas that can withstand winds up to 150 MPH.
What kind of nails do you use for wood shingles?
Rust-resistant fasteners should be your final choice. We recommend stainless steel fasteners, hot-dip galvanized, or aluminum. With time, inappropriate fasteners can leave rust marks on the shingles, especially on natural cedar shingles.
What is the fastest way to remove shingles from a roof?
Tear-Off Shingles Along the Edge Using Roofing Tear Off Tools. After stripping the shingles down to the roof jacks, remove the jacks. Work the remaining courses loose with a fork or tear off shovel, but don’t pry them completely free or they’ll slide off the roof. Loosen the shingles all along the eaves.
Is it better to tear off old shingles?
In most cases, more than two layers of roofing shingles does require a tear-off. Laying new shingles over old shingles is easily prone to leaks and reduces the life of the new shingles. This alone ought to be reason enough to do a tear-off; it’s just a bad value not to.
Can staples be used for shingles?
The type of fastener used to fasten the shingles is especially important in resisting wind uplift and pull-through. Fasteners for asphalt shingles should be roofing nails or staples. The head of a roofing nail or the crown of a staple is what actually holds a shingle in place.
Can you use staples to install cedar shingles?
The Cedar Shake & Shingle Bureau prefers the use of nails, however if you choose to use staples they must be stainless steel Type 316 in locations within fifteen (15) miles of salt water. For locations outside of the salt water zone – stainless steel staples Type 304 or Type 316 must be used.
Can you staple cedar shingles?
Can I remove my own shingles?
How do roofers get shingles on roof?
Shingles are delivered on a boom truck and unloaded directly onto your roof. This can happen at different points in the job, depending on the size of the roof. The materials typically get delivered mid-tear off.
How long do roof tears last?
On average, an overlay lasts around 16 years. That said, for most shingles, the warranty is valid for the same length of time whether the shingles were used in an overlay or a tearoff.
How many times can you shingle over shingles?
There are already two layers of shingles on your roof – Most building codes only allow two layers of any type of roofing on your home. So if there are already two layers, the choice is made for you. You need to tear off the roof and install a new one.