Menu Close

How do you turn off the drum light on a Brother printer?

Admin

How do you turn off the drum light on a Brother printer?

Drum Stop

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.

How do you reset the drum counter on a Brother HL l2360dw?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “OK” button for 2 seconds to display the “Drum Unit” option, then press “OK”.
  3. Press the “up” arrow button to reset the counter.

How do you reset the drum on a Brother HL l2360dw?

FAQs & Troubleshooting

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for about two seconds to display Drum Unit, and then press OK.
  4. Press the Up arrow key to display Reset and reset the drum counter.
  5. Close the front cover.

How do you reset the drum on a Brother printer HL l23200?

Close the front cover. Press the Go button 5 times. After a short pause, all of the LEDs will turn OFF and the machine will go through its normal boot up during which different LEDs will turn on and off. The reset is done when the Ready LED is ON.

How do you reset the drum counter on a Brother MFC l2740dw?

How to reset the drum counter:

  1. Press the “X” on the printer to display to interrupt the “replace drum” message.
  2. Press the tool button (settings) > All Settings > Machine Info. > Parts Life.
  3. Hold down the # button until the LCD message changes.
  4. Press “Drum” and then select “Yes”
  5. Select the home button.

What does it mean to slide the green tab on the drum unit?

The message ‘Drum Error, Slide the Green Tab on the Drum Unit’ will appear when the drum unit is dirty or has reached the end of its life and needs to be replaced.

How do you reset the drum on a Brother printer HL l23000?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.