Menu Close

What causes lock stick on a knife?

What causes lock stick on a knife?

Lock stick happens most prominently in knives with titanium handles because titanium is susceptible to galling and tends to stick to dissimilar metals. For example, if you have a titanium lockbar contacting with the tang of an S35VN blade, they have the tendency to stick to one another.

Why is my pocket knife not opening?

This could be caused by the metal in the knife oxidizing to the point of the blades adhering to the casing or each other. If the knife has only metal parts, simply give it a good soaking in a mineral oil. Then, buff it clean in a day or two. Once you’ve done this, keep the knife oiled from then on.

What is a piston lock knife?

A piston lock pocket knife, also known as an axis lock pocket knife, is a knife that has a sliding piston that locks and unlocks the knife blade. These are single blade knives that can come in a variety of styles and sizes.

Are button lock knives good?

Button lock knives are reliable, durable, and often found in automatics. Button locks (also known as plunge locks) are primarily found on automatic knives (although manual examples such as the Protech Cambria exist). Pressing the button releases lockup and allows spring tension to take over.

Why is my Swiss Army knife hard to open?

If it feels sort of hard to open add more oil to that tools hing. Once finished every tool should be easy to open. Go though and open and every tool again to make sure you did not miss one. Now the knife should have oil on a lot of the knife and in every tight crevasse.

How long does it take to break in a knife?

Break it in You should notice improvement in the action within a day or two and after about a week the knife should work as it was designed to.

What causes a lock to jam?

Debris is a major cause of jammed locks. Keep dust and dirt away from the keyhole and entire lock mechanism by using a dry lubricant instead of an oil-based one. Teflon or graphite lubricants are great options.

Does WD-40 ruin locks?

For this purpose, we offer you the WD-40 Specialist Dry PTFE Lub; due to its Teflon formula, it is perfectly suitable for locks in contact with a lot of dust and other dirt. The product, once applied in the mechanism, will create a dry protective film thus avoiding the deposit of dust, dirt or oils.

How strong is the shark lock?

“The Shark is very comparable to most Tri-Ad locks for its size and weight,” Demko adds. “The AD-20.5 has been tested to 875 inch pounds of torque, this is a very impressive number for a 3.5 oz. knife.”

How does a frame lock work?

A bicycle frame lock is firmly attached to the rear strut and is thus always there. The steel bar pushes between the spokes, blocking the rear wheel. This protects your bike from being pushed away.

What is a plunge lock knife?

The plunge lock works by using a spring-loaded button that is located next to the tang of the knife. It rests inside a groove when the knife is open, thereby locking it in the open position. Basically, it wedges itself between the tang of the blade and the handles when the knife is opened.

Why does my OTF keep coming off track?

Blade Is Stuck The most common problem with OTF automatic knives is the blade gets stuck and doesn’t spring out or draw back in. Sometimes this occurs when the blade is struck against something that doesn’t move and it bounces back.

Do OTF knives lock?

Contrary to folding knives which are operated manually, OTF knives are automatic and when activated the blade springs open through the front and locks into place.

How does a flick knife work?

When the button is pushed, the lever, which is on a small rocker, is pulled out of the spring’s way. The spring snaps back into its original shape, pulling the base of the blade around as it does so, flipping the blade’s point out from the side of the handle.

How does OTF knife work?

Contrary to folding knives which are operated manually, OTF knives are automatic and when activated the blade springs open through the front and locks into place. There is usually a button or slide switch that activates the internal mechanism to allow the blade to eject.