How do I turn off my car security light?
Insert your car key into the ignition and turn it on just so that the accessories activate, but not the engine. Step 3: Do a secondary check on the anti-theft light. If it is no longer blinking, turn the key to the “off” position and let your car sit for a couple of minutes.
What does it mean when security light stays on?
On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.
What does theft attempted mean on GMC?
If access to the vehicle is attempted without using the unlock command from the keyless entry transmitter, the BCM will sound the alarm and display a THEFT ATTEMPTED message on the instrument panel.
Why does my security light not switch off?
If your outdoor security light won’t turn off, it’s most likely because of one of these problems: The sensitivity settings are too high. The duration settings are too high. It’s stuck in auto mode.
What is the red blinking light on my dashboard?
1 Answer. That red flashing light is more than likely part of your vehicles security system. When it’s flashing, it means your car is locked and the system is activated. Once you unlock the car with your key fob the system turns off so you can start the car.
How do I disable theft deterrent?
Look for a button that allows you to slide the physical key out of the fob. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in this position. This will signal to your car’s system that you have the right key, and will enable you to bypass your car’s alarm system.
Why does my car say theft detected?
The vehicle must be armed electronically to enable the alarm system) Vehicle theft: This alert occurs when tampering is detected with the vehicle’s key cylinder. This can be triggered by an invalid key, screwdriver, foreign key fob or no key detected when trying to start the vehicle.
What is GM PassLock?
July 31, 2005. The PassLock system was designed to prevent vehicle theft by disabling fuel to the engine if attempts are made to start the vehicle without the correct bitted key.
How do you fix a motion sensor light stays on?
Resetting With the Breaker If your light doesn’t have a light switch or that method doesn’t work, head to the circuit breaker to reset the light. Flip the breaker that controls the motion-sensor light to the off position. Wait 30 to 60 seconds before turning the breaker back to the on position.
How do you tell if you have passlock?
Most PASSLock-equipped vehicles have a telltale indicator in the instrument panel. When a PASSLock-equipped vehicle is being started, the instrument panel warning light for PASSLock remains on until the engine starts.