How do I ping my DVR IP address?

You can use the “ping” command from the command line (ie “ping 192.168. 1.112”) to see if the DVR is accessible at all. Ping the local IP address that was assigned to the DVR. You should see response times from the DVR (no timeouts).

Table of Contents

How can I see my DVR from outside network?

How to Remote Access a DVR

Create and Configure a Dynamic DNS Account.
Set Up a Dynamic DNS on the Router.
Connect the MPEG-4 DVR and Locate the DVRs IP Address.
Setting up a Virtual Service on the Router.
Install the Remote Viewer Software for Remote Internet Access.

How do I make sure my TV receiver and DVR receiver are connected to the network?

Please go to Menu>Settings>Network Setup> and at the bottom of that screen you should see Wired Connected and Internet Connected. If not, check to make sure your Ethernet cable is securely inserted in the DVR+ (CM-7500) port and in the router/modem at the other end.

How do I get my DVR online?

Getting Started

Make sure that your Modem is connected to the internet.
Connect your modem to the internet port on your router.
Connect your DVR to one of the data ports of your router.
Connect your DVR to your monitor.

How can I access my DVR over the internet?

How do I reset my Speco Technologies DVR password?

Please enter the user name for the account for which you have lost the password. If you have forgotten your user name, you will need to contact Speco at 1-800-541-5415, 1-847-678-424 or Email Speco. We will get back to you during our regular business hours to help you recover your account.

Why is my DVR not connecting?

If you have connected your DVR / NVR to your network router and it is not getting an Internet connection, or a valid IP address, check your Ethernet cable connection, router port settings, or DHCP / IP settings.

How do I connect my directv receiver to my wireless network?

Select Settings > Internet Setup > Connect Now. If you’re reconnecting to the internet, select Reconnect Now. After the system checks the connection status, select Set Up Wireless. Select your wireless network.

What is DVR IP address?

If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the ‘Setup’ button. Enter the system password and press ‘Enter’. Select ‘System Setup’ and press ‘Enter’.