Menu Close

How do you reset the drum on a Brother HL 5350dn?

Admin

How do you reset the drum on a Brother HL 5350dn?

Replace Drum

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.

How do I reset my Brother printer drum?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

How do you reset the drum on a brother printer?

How do I reset my brother hl 5350dn toner?

Brother HL5340D HL5370DW Toner Counter Reset – TN3290

  1. Open the front cover and leave open while completing the following steps.
  2. Turn the printer off.
  3. Hold the GO button while turning the printer on.
  4. When 3 led light up release the GO button.
  5. Press the ‘go’ button twice (3 LED’s should light up again).

How do I reset my brother hl 5250dn?

Reset the settings to factory default

  1. Power the machine off.
  2. Press down the GO button and power the machine on.
  3. Keep pressing GO until the all LEDs are on. The Status LED will be off.
  4. Release GO. All LEDs will be off.
  5. Press GO ten times. Your machine’s printer settings will be reset.

How do I reset my brother hl 5340D?

Brother HL-5340D and HL-5370DW Toner Reset Instructions

  1. Turn off the printer and open the front cover.
  2. Press and hold Go-button.
  3. Turn on the machine while holding down the Go-button.
  4. When all three LEDs are lit, release the Go-button.
  5. Double-click the Go-Button button, and the three LEDs should be lit again.

What happens if I don’t replace printer drum?

But the replacement of a drum unit is vital to laser printers’ health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won’t break your printer, it will just fail to stop printing at a certain point.

Why does my Brother printer keep telling me to replace the drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you reset the drum on a Brother HL 5340D?

7 Press and hold down the Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. ! IMPORTANT Do not reset the drum counter when you only replace the toner cartridge.

How do you reset the toner on a Brother HL 5370DW?

How do I factory reset my HL 5370dw?

The printer will restart. Turn off the printer. Make sure that the front cover is closed and the power cord is plugged in. Hold down Go as you turn on the power switch….Default settings.

1 Turn off the printer.
4 Release Go. Make sure that all the LEDs are off.

Is it worth replacing a printer drum?

How long do Brother printer drums last?

approx. 15,000 pages
The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.