How do you clear a Whirlpool error code?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I reset my Whirlpool Duet front load washer?
Method 1: Unplug it The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
How do you clear the error code on a Whirlpool Duet dryer?
How to Clear Whirlpool Duet Error
- Write the error code down so you won’t forget it after it is cleared.
- Press the “Pause/Cancel” button on the control panel twice to clear the error.
How do I reset my Whirlpool Duet dryer?
General Reset Disconnect power to the dryer and wait 30 minutes then reconnect the power and resume normal use. If the problem continues or an error code returns, contact Whirlpool for advice or repair.
Is there a reset button on a Whirlpool Duet washer?
Steps to Reset a Whirlpool Washing Machine Turn the dial counter-clockwise one click left, clockwise three clicks, counterclockwise one click, and then clockwise one click.
What year was the Whirlpool Duet washer made?
2001
It’s not a new car; it’s the Duet washer from Whirlpool. In 2001, the company conducted its first United States launch of a high-end, front-loading washer and dryer pair. This new pair represents a distinct departure from the traditional top-loading ‘white box’ that dominates the appliance market in the US.
What size is the Whirlpool Duet?
Whirlpool GHW9150PW
| Dimensions | |
|---|---|
| Depth with Door Open: | 50 1/2″ |
| Exterior Dimensions (WxHxD): | 27″ x 38″ x 31 1/2″ |
| Wash System | |
| AccuWash Temperature Control: | Yes |
Does the Whirlpool Duet washer have a reset button?
Steps to Reset a Whirlpool Washing Machine Turn off the washer. Turn the mode dial to NORMAL. Turn the dial counter-clockwise one click left, clockwise three clicks, counterclockwise one click, and then clockwise one click.
What are the codes on a Whirlpool Duet dryer?
Whirlpool Duet dryer error codes
- PF. Power failure. Check/
- F:01. Main electronic control board failure. Check/
- F:02. Keypad/User Interface failure. Check/
- F:22. Outlet thermistor failure. Check/
- F:23. Outlet thermistor failure. Check/
- F:24. Inlet thermistor failure. Check/
- F:25. Inlet thermistor failure.
- F:28. Moisture sensor failure.
What causes a Whirlpool Duet dryer not to start?
Several factors may cause your whirlpool duet dryer not to start. It may be because of power issues, a faulty motor, problems with the start button, a blown thermal fuse, or a defective door switch. You can troubleshoot most of these problems, but if unsure, please call a professional.