What does F07 mean on washing machine?
F07 — Electronic circuit board fault / heating circuit fault. Issue: During a wash cycle the programme pauses part way through/ the machine is not heating and the pump runs continuously.
What does F02 mean on Fagor washing machine?
The F02 error code on a Whirlpool washer indicates that the control detects a long drain time. This can be caused by excessive suds in the tub, a restriction or clog in the drain system or by a number of other component failures. If the Whirlpool washer did not drain, check for excessive suds in the tub.
What is e7 error in washing machine?
Error code E07 means there is a problem with either the washing machine door lock, or the motor.
How do I fix f07 error?
Check the wire harness connections between the drive motor and the motor control unit (MCU). Also, check the wire harness connections between the MCU and the central control unit (CCU). If all connections appear sound, it’s possible that the drive motor or motor control unit is defective.
How do I fix the F2 on my washing machine?
A stuck contact on the pressure switch can stop the advancement of the wash cycle and keep the water from draining. A few taps on the top of the switch with a screwdriver handle can release the contact and fix the problem causing the F2 error code.
Where is Fagor manufactured?
Fagor Electrodoméstico was a large domestic and commercial appliance manufacturer based in the Basque Country, Spain and run by the Mondragon Corporation….Fagor.
| Type | Sociedad Cooperativa |
|---|---|
| Headquarters | Mondragón , Spain |
| Number of employees | 6,000 (2006) |
| Parent | Amica Group |
| Website | www.fagor.com |
Why is my washer stuck on sensing fill?
When it gets stuck on sensing, it’s likely because of a faulty water inlet valve, shift actuator, drive motor, or main control board. A fault at any of those parts can prevent the washer from advancing past the sensing stage.
What does F02 mean?
a long drain time
The F02 error code on a Whirlpool washer indicates that the control detects a long drain time.
What does f02 error code mean?
What does E07 mean on Vari desk?
E07 will display if the cable connected to the M1 port is not fully secured. Disconnect and reconnect the cable. Follow below instructions to reset (RST) the desk. If the error persists, contact Vari.
What is a Fagor fault code?
These fault codes are written for washing machine repairers and not for the general public by Fagor and they assume a certain level of competence on the part of the user in diagnostic routines.
What do the error codes on my Fagor washing machine mean?
These fault codes are for Fagor washing machine models that use a digital display using what Fagor term the V3, V4 and V5 electronic controls so, these erorr codes cover a number of Fagor produced washing machines.
Are there any spare parts or support available from Fagor?
Fagor spare parts and support may be limited since the group collapsed in 2013. These fault codes are written for washing machine repairers and not for the general public by Fagor and they assume a certain level of competence on the part of the user in diagnostic routines.
What is Fagor known for?
Today Fagor sells more than half of its products domestically and is considered the country’s largest home appliance company. Also, it is the fifth largest white goods manufacturer in the EU. Its range of products is comprehensive, from washing machines and fridges, to dishwashers and beverage centers.