Where is the best place to site a bird table?
sheltered position
The bird table needs to be positioned where there is not too much direct sunlight or in a windy location. Birds will feel safer it is in a sheltered position. If possible locate in a quiet place in your garden, preferably not by a path or any other area with human traffic passing.
How do you make a bird feeder platform?
A very simple and effective feeder can be constructed, as illustrated. Nail four pieces of 1 x 1-1/2-inch wood to form a square. Install diagonal braces from corner to corner. Staple a piece of metal window screening on the frame to serve as a floor.
Why won’t birds come to my bird table?
There are many possible reasons birds aren’t coming to your feeder. Birds don’t come to your bird feeder because there is something wrong with your bird food, the feeder, the placement of feeders, the landscaping and safety of your yard, or the time of year.
How high should a bird feeder be off the ground?
about five feet
Pole-mounted feeders should be about five feet off the ground and protected by a cone-shaped baffle (at least 17 inches diameter) or similar obstacle below the feeder. Locate pole-mounted feeders at least 10 feet from the nearest shrub, tree, or other tall structure.
Should bird feeders be sun or shade?
A sheltered southeastern exposure is best for hanging a bird feeder since birds like to feed in the sun and out of the wind. Birds also prefer to have a clear view over their feeding area so they can see any predators.
What do you put on a bird feeder platform?
You can put in seeds, fruits, bread, pasta, rice, nuts, jelly, peanut butter, anything! You can even add a dish of water, if you wish. Because of their open and inviting style, this feeder attracts the most birds. Platform feeders attract the most kind of birds.
What do you line a bird table with?
Although unsightly, 1.5″ (4 cm) wire mesh around the table can stop squirrels and cats, but it will also keep away larger birds such as thrushes, woodpeckers and jays. An alternative is an inverted biscuit tin fixed at the top of the post supporting the table.
What do you put in a platform bird feeder?
How do you make a large platform bird feeder?
WHAT YOU’LL DO
- STEP 1: Cut platform feeder base.
- STEP 2: Measure and cut trim pieces so that they fit around the edge of the top of the platform feeder.
- STEP 3: Nail or screw the trim pieces to the platform feeder.
- STEP 4: Fasten the pipe flange in the center of the bottom side of the platform with ¾-inch screws.