What does ZBM2 mean?
Z code
| Code | Meaning | Source |
|---|---|---|
| ZBM2 | Place a competent operator on this circuit | C&W |
| ZLD2 | I cannot transmit pictures. | C&W |
| ZSF | Switch off…(1. IFF; 2. IFF sets for 10 minutes in area denoted except for ships whose call signs follow). | C&W |
| ZBW no. | Change to backup frequency no. | C&W |
What does Qsb mean in ham radio?
my signals fading
Amateur Radio “Q” signals
| Sign | Meaning |
|---|---|
| QRZ | Who is calling me? You are being called by ___. |
| QSA | What is the strength of my signals? The strength of your signals is ___ (1-Scarcely perceptible, 2-Weak, 3-Fairly Good, 4-Good, 5-Very Good.) |
| QSB | Are my signals fading? Your signals are fading. |
What is a radio Q-code?
The Q-code is a standardised collection of three-letter codes that each start with the letter “Q”. It is an operating signal initially developed for commercial radiotelegraph communication and later adopted by other radio services, especially amateur radio.
What does the signal Z mean?
Z-Codes are mainly used over commercial and military teleprinter, facsimile and high speed automatic telegraphy links and are not. normally used by Radio Amateurs, even when using RTTY, but the list is included for general interest.
What does V code mean?
V codes, described in the ICD-9-CM chapter “Supplementary Classification of Factors Influencing Health Status and Contact with Health Services,” are designed for occasions when circumstances other than a disease or injury result in an encounter or are recorded by providers as problems or factors that influence care.
What is the meaning of QSL police?
Q codes are three letter groups with each group of letters having a specific meaning. Each group o letters begins with a Q. In this particular case, QSL means either “do you confirm receipt of my transmission” or “I confirm receipt of your transmission”.
What is Q signal?
Definition of Q signal : any of various conventional code signals employed in radiotelegraphy that is a combination of three letters the first of which is Q (as QRS for “send slower”, QSD for “your keying is bad”)
What is station QTH?
In amateur radio, the “QTH” Q-code means “What is your position?” when used as a question or “My position is…” when used as a statement. The Automatic Packet Reporting System® is a common avenue that amateur radio operators communicate their positions, among other useful information. QTH.
What are Z codes used for?
Z codes are a special group of codes provided in ICD-10-CM for the reporting of factors influencing health status and contact with health services. Z codes (Z00–Z99) are diagnosis codes used for situations where patients don’t have a known disorder.
What is the dash in Morse code?
— (dot dash). One of the first Morse code words or messages that many people learn is S-O-S, the universal signal of distress. It’s the signal telegraph operators sent from the Titanic as it was sinking.
What are Z codes in the DSM?
Common Z codes for therapists
- Z00. 4 (general psychiatric examination, not elsewhere classified)
- Z03. 2 (observation for suspected mental and behavioral disorders)
- Z04. 6 (general psychiatric examination, requested by authority)
- Z09. 3 (follow-up examination after psychotherapy)
- Z13.
- Z13.
- Z50.
- Z54.
What does QTH mean in ham radio?
For example, QTH stands for “My location is _____.” So, when I send QTH ANN ARBOR MI I am telling the other operator that I am located in Ann Arbor, MI. When followed by a question mark, the Q-signal turns into a question. So, QTH? asks the question, “What is your location?”