Which are the pins in SATA data connector?
The Serial ATA [SATA] bus is defined over two separate connectors, one connector for the data lines and one for the power lines [shown left]….SATA Power pinout.
| Pin # | Signal name | Signal Description |
|---|---|---|
| 1 | V33 | 3.3v Power |
| 2 | V33 | 3.3v Power |
| 3 | V33 | 3.3v Power, Pre-charge, 2nd mate |
| 4 | Ground | 1st Mate |
What is SATA pin?
The SATA 15-pin power supply connector is one of the standard peripheral power connectors in computers. It’s the standard connector for all SATA-based hard drives and optical drives. SATA power cables protrude from the power supply unit and are meant to reside only inside the computer case.
What is the number of pins in a SATA 2.5 drive?
2.5″ SATA SSD and Slim SATA (MO-297) Connector There are a total of 22-pins broken into 7-pins for Data and 15-pins for Power.
What are the 8 pins on a SATA drive?
A jumper pin is a rectangular connector that creates a circuit between two pins. Seagate SATA drives have four pins, while Western Digital SATA drives have eight pins, with the additional pins to be used by technicians or your network administrator for powering up the drive while in standby mode.
How many pins are on a SATA power connector?
15-pins
SATA power cable connectors are the larger of the two, featuring 15-pins.
Does SATA cable color matter?
Some SATA cables even glow in the dark. The differences among SATA cables depends on the types of connector they use and the way you set up your computer hardware. Their colors may help you distinguish among the devices your SATA cables connect, but color alone doesn’t signal functional differences among them.
What is the 8 pin port on hard drive?
Are SATA cables color coded?
SATA cables come in varied colors besides blue and red, including black, yellow and orange. Some SATA cables even glow in the dark. The differences among SATA cables depends on the types of connector they use and the way you set up your computer hardware.
How do I know if I have SATA 1 2 or 3?
Next to the SATA-connectors on the motherboard there should be information about their bandwidth. You can see whether each SATA connector is a SATA 2 or SATA 3 connector. 6G is SATA 3 and 3G is SATA 2.
Are SATA ports color coded?
Usually, the color that has the most ports are the Primary SATA controller ports (usually black). The color that has even number of ports (usually 2) are RAID-capable (if your motherboard supports it, and I’ve seen yellow and red), and the secondary SATA controller ports are usually red in color.